Document
Aluminum Electrolytic Capacitors
Surface Mount Type S series
Features
● Endurance : 85 ℃ 2000 h ● Vibration-proof product (30G guaranteed) is available upon request. (ø8 ≦) ● AEC-Q200 compliant ● RoHS compliant
Specifications
Category temp. range
–40 ℃ to +85 ℃
Rated voltage range
4.0 V to 100 V
Capacitance range
1 μF to 1500 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
Leakage current
I ≦ 0.01 CV or 3 (μA) (Bi-Polar I ≦ 0.02 CV or 6 (μA)) After 2 minutes (Whichever is greater)
Dissipation factor (tan δ)
Please see the attached characteristics list
Characteristics at low temperature
Rated voltage (V) Z (-25 ℃) / Z (+20 ℃) Z (-40 ℃) / Z (+20 ℃)
4.0 6.3 10 16 25 35 50 63 100 7 4 3 2 2 2 2 3 3 (Impedance ratio at 120 Hz) 15 8 6 4 4 3 3 4 4
After applying rated working voltage for 2000 h (Bi-polar:1000 h for each polarity)
at +85 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits.
Within ±20 % of the initial value
Size code
Rated voltage
Capacitance change
Endurance
Capacitance change
B(ø4) to D, D8(ø6.3) ≦ D(ø6.3) Miniature
4V 6.3 V ≧ 10 V
1000 hours ±30 % 1000 hours ±20 %
Dissipation factor (tan δ) ≦ 200 % of the initial limit
Leakage current
Within the initial limit
After storage for 1000 h at +85 ℃ ± 2 ℃ with no voltage applied and then being
Shelf life
stabilized at +20 ℃, capacitors shall meet the limits specified in endurance.
(With voltage treatment)
After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the
Resistance to soldering heat
following limits. Capacitance change Within ±10 % of the initial value
Dissipation factor (tan δ) Within the initial limit
Leakage current
Within the initial limit
Frequency correction factor for ripple current
Frequency(Hz) Correction factor
50, 60 0.70
120 1.00
1k 1.30
10 k to 1.70
Marking
Dimensions
Example : 4 V 33 μF Marking color : BLACK
0.3 max.
A±0.2
K (I)
(I) (P)
H B±0.2
øD±0.5
Negative polarity marking (–) (No marking for the bi-polar)
Capacitance (μF)
33 4S
Series indentification (S) or(A)
Mark for Lead-Free products (Black dot)
Lot number
Rated voltage(V) (6=6.3 V)
L
W
Pressure Relief(ø10and larger)
( )Reference size
Size code øD
L
A, B
H
I
B
4.0
5.4
+0.1 -0.2
4.3
5.5 max.
1.8
C
5.0
5.4
+0.1 -0.2
5.3
6.5 max.
2.2
D
6.3
5.4
+0.1 -0.2
6.6
7.8 max.
2.6
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6
E 8.0 6.2±0.3 8.3 9.5 max. 3.4
F 8.0 10.2±0.3 8.3 10.0 max. 3.4
G 10.0 10.2±0.3 10.3 12.0 max. 3.5
W
0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2
Unit:mm
P
K
1.0 1.5 1.8 1.8 2.2
0.35
+0.15 -0.20
0.35
+0.15 -0.20
0.35
+0.15 -0.20
0.35
+0.15 -0.20
0.35
+0.15 -0.20
3.1 0.70±0.2
4.6 0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.