Document
Aluminum Electrolytic Capacitor/FK Surface Mount Type Series: FK Type : V
n Features
Endurance: 2000 to 5000h at105°C Low impedance (40 to 60% less than FCseries) Miniaturization(30 to 50% less than FC series) Vibration-proof product is available upon request.(φ8 < =) RoHS directive compliant(Parts No:EEV∗ φ12.5 < =,EEE∗)
Country of Origin
Japan
n Specifications
Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature
-55 to +105°C 6.3 to 100V .DC 3.3 to 6800 µ F ±20 % (120Hz/+20°C) I< = 0.01 CV or 3(µA) After 2 minutes application of rated working voltage at +20°C. ( Whichever is greater) Please see the attached standard products list
W.V. (V) 6.3 Z(-25°C) / Z( +20 ° C) 2 Z(-40 °C)/ Z(+20 °C) 3 Z(-55°C)/ Z(+20 °C) 4 10 2 3 4 16 2 3 4 25 2 3 3 35 2 3 3 50 2 3 3 63 2 3 3 80 2 3 3 100 2 3 3
(Impedance ratio at 120 Hz)
Endurance
> dia.12.5 and suffix After the life with DC rated working voltage at +105±2°C for 2000 hours ( = ìGî india.8 to 10 are 5000hours)the capacitors shall meet the limits specified below. post-test requirement at +20°C.
Shelf Life Resistance to Soldering Heat
Capacitance change ±30% of initial measured value (Suffix “G” is 35%) < 200 % of initial specified value (Suffix “G” is 300%) tan δ = < DC leakage current = initial specified value After storage for 1000hours at +105±2 °C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering ( Refer to page 184 for recommendable temperature profile.) and then being stabilized at +20°C, capacitor shall meet the following limits. Capacitance change ±10% of initial measured value < initial specified value tan δ = < initial specified value DC leakage current =
n Dimensions
n Marking
in mm (not to scale)
A±0.2 ( ) reference size
(I)
Example.16V10µF Marking color : BLACK
W.V. code
φD±0.5
0.3 max
Lot number
Size code B Capacitance (µF) C D D8 E F 25 E 100 2A 35 V G H13 J16 K16
D
L
A,B H max. 4.3 5.3 6.6 6.6 8.3 8.3 5.5 6.5 7.8 7.8 9.5 10.0
I
W
P
(I)
Negative polarity marking
10 C FK
Capacitance (µF) Series identification
B±0.2
B~G=L ±0.3 H~K=L±0.5
w
(P)
K
>φ12.5) (=
W.V. code
4.0 5.8 5.0 5.8 6.3 5.8 6.3 7.7 8.0 6.2 8.0 10.2
1.8 0.65±0.1 1.0 0.35 -0.20 to +0.15 2.2 0.65±0.1 1.5 0.35 -0.20 to +0.15 2.6 0.65±0.1 1.8 0.35 -0.20 to +0.15 2.6 0.65±0.1 1.8 0.35 -0.20 to +0.15 3.4 0.65±0.1 2.2 0.35 -0.20 to +0.15 3.4 0.90±0.2 3.1 0.70 ±0.20 3.5 0.90±0.2 4.6 0.70 ±0.20 4.7 0.90±0.3 4.4 0.70 ±0.30 5.5 1.20±0.3 6.7 0.70 ±0.30 6.7 1.20±0.3 6.7 0.70 ±0.30
Negative polarity marking
FK
Series identification
W.V. code
V Code V Code 6.3 j 50 H
Lot number 10 A 63 J 16 C 80 K
10.0 10.2 10.3 12.0 12.5 13.5 13.5 15.0 16.0 16.5 17.0 19.0 18.0 16.5 19.0 21.0
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purch.