High Performance Combo Controller
NCP1910
High Performance Combo Controller for ATX Power Supplies
Housed in a SO−24WB package, the NCP1910 combines a s...
Description
NCP1910
High Performance Combo Controller for ATX Power Supplies
Housed in a SO−24WB package, the NCP1910 combines a state-of-the-art circuitry aimed to powering next generation of ATX or flat TVs converters. With a 65 or 100 kHz Continuous Conduction Mode Power Factor Controller and a LLC controller hosting a high-voltage driver, the NCP1910 is ready to power 85+ types of offline power supplies. To satisfy stringent efficiency considerations, the PFC circuit implements an adjustable frequency fold back to reduce switching losses as the load is going light. To cope with all the signal sequencing required by the ATX and flat TVs specifications, the controller includes several dedicated pins enabling handshake between the secondary and the primary sides. These signals include a power-good line but also a control pin which turns the controller on and off via an opto coupler. Safety-wise, a second OVP input offers the necessary redundancy in case the main feedback network would drift away. Finally, a fast fault input immediately reacts in presence of an over current condition by triggering an auto-recovery soft-start sequence.
http://onsemi.com
SO−24WB Less Pin 21 DW SUFFIX CASE 752AB
MARKING DIAGRAM
NCP1910XXX AWLYYWWG
Features
Fixed-Frequency 65 or 100 kHz CCM Power Factor Controller
1
Average Current-Mode Control for Low Line Distortion
Dynamic Response Enhancer Reduces Bulk Undershoot Independent Over Voltage Protection Sensing Pin with Latch-off
XXXXX = Speci...
Similar Datasheet