NCP4588
200 mA, Output Capacitor Free, LDO Linear Voltage Regulator
The NCP4588 is a CMOS 200mA LDO which is stable wit...
NCP4588
200 mA, Output Capacitor Free, LDO Linear Voltage
Regulator
The NCP4588 is a CMOS 200mA LDO which is stable without an output capacitor. This results in a reduction in component count, cost and board area, as well as contributing to a more robust solution in hostile environments. With quiescent current < 9.5 mA and PSRR > 60 dB, the device is an excellent trade off between the two features. The family is available in a variety of packages: SC−70, SOT23 and a small, ultra thin 1.2 x 1.2 x 0.4 mm XDFN.
Features
Operating Input Voltage Range: 1.4 V to 5.25 V Output Voltage Range: 1.0 to 4.2 V (available in 0.1 V steps) Output Voltage Accuracy: 1% Quiescent Current: 9.5 mA Standby Current: 0.1 mA Very Low Dropout: 270 mV (IOUT = 200 mA, VIN = 3.0 V) High PSRR: 70 dB at 1 kHz, VOUT ≤ 1.2 V
65 dB at 1 kHz, 1.2 < VOUT < 2.2 V 60 dB at 1 kHz, VOUT ≥ 2.2 V
Line Regulation 0.02%/V Typ. Current Fold Back Protection: 50 mA at short Stable with no Output Capacitor Available in SC−70, XDFN and SOT23 Package These are Pb−Free Devices
Typical Applications
Battery Powered Equipments Portable Communication Equipments Cameras, VCRs and Camcorders
VIN C1 100 n
NCP4588x VIN VOUT
CE GND
VOUT C2 100n*
* output capacitor may be omitted Figure 1. Typical Application Schematic
http://onsemi.com
MARKING DIAGRAMS
SC−70 CASE 419A
XXX MG G
XDFN6 CASE 711AA
XX MM
SOT−23−5 CASE 1212
XX M
XX, XXX= Specific Device Code M, MM = Date Code A = Assembly Location ...