Document
BL2000 WildcatTM
Single Board Computer
Models BL2000, BL2010, BL2020, BL2030
The Wildcat gives OEM designers Ethernet connectivity in a low-cost, high-performance single-board computer. These compact boards are rich with the digital I/O, A/D, and D/A designers need for embedded control and monitoring applications. In addition, the Wildcat's compact board size of 4.15" x 3.43" (105 x 87 mm) allows for easy integration. Ethernet models are ideal for remotely monitoring and supervising another programmable system or web-enabling new or existing products. For applications where Ethernet connectivity is not required, the Wildcat has non-Ethernet versions.
Features
• • • • • • • Rabbit 2000 microprocessor @ 22.1 MHz 10Base-T Ethernet with RJ-45 Up to 28 digital I/O Up to 11 A/D and 2 D/A 4 serial ports Optional 512K Flash / 512K SRAM Onboard relay
The BL2000 models are available in four configurations-two with Ethernet, two without, and feature up to 28 digital I/O including 5 or 7 dualpurpose analog or digital inputs, 3 RS-232/485 serial ports (plus one programming port), Rabbit 2000™ microprocessor at 22.1 MHz, 128K SRAM and 256K Flash, onboard SPDT relay, LEDs, 7 timers, and battery-backed real-time clock. For the most demanding applications, the BL2000 and BL2020 models include 4 channels of 12-bit resolution A/D input, 5 channels of dual-purpose input, and 2 channels of 12-bit D/A output. For applications not requiring high-resolution analog I/O, the BL2010 and BL2030 offer 4 channels of 10-bit resolution A/D input and 7 channels of dual-purpose input. The dual-purpose inputs are software configurable as analog inputs or programmable-threshold digital inputs. All BL2000 models can be programmed and debugged over Ethernet/Internet using appropriate accessory hardware. Systems with built-in 10Base-T Ethernet can be directly controlled and monitored across networks or the Internet and can also open sockets to remote devices, serve web pages, or send E-mail.
Programming the Wildcat
Programs are developed using Z•World's industry-proven Dynamic C® software development system. An extensive library of drivers and sample programs is provided, along with royalty-free TCP/IP stack with source. All Wildcat models can be programmed and debugged over Ethernet/Internet using appropriate accessory hardware.
1/26/2005
Free Datasheet http://www.datasheet4u.com/
BL2000 Wildcat Specification
Feature
Microprocessor Ethernet Port Flash Memory SRAM Backup Battery Keypad/Display Digital Inputs Digital Outputs Analog Inputs Four 12-bit resolution
BL2000
BL2010
BL2020
None 256K (standard) 128K (standard)
BL2030
Rabbit 2000 at 22.1 MHz 10Base-T, RJ-45, link and activity LEDs
Socketed 3 V lithium coin-type, 256 mA·h, supports RTC and SRAM See our “OP” products for serial display options 11: protected to ±36 V DC 8: sink 200 mA, 2: sink 750 mA, 40 V DC max. Four 10-bit resolution Four 12-bit resolution Four 10-bit resolution 1 MΩ, ±10 V DC, up to 4,000 samples/sec Two 12-bit resolution, 0-4 V DC, update rate 12 kHz 5 at 12 kΩ, 12-bit resolution, 0-48 V DC None 7 at 12 kΩ, 10-bit resolution, 0-48 V DC Two 12-bit resolution, 0-4 V DC, update rate 12 kHz 5 at 12 kΩ, 12-bit resolution, 0-48 V DC None 7 at 12 kΩ, 10-bit resolution, 0-48 V DC
Analog Outputs Dual Purpose Analog or Digital Inputs Relay Output Serial Ports Serial Rate Connectors Real-Time Clock Timers Watchdog/Supervisor Power Operating Temp. Humidity Board Size Enclosure Size LEDs Pricing (qty. 1/100) Part Number Starter Packages Part Number
SPDT, 1 A @ 30 V DC, 0.3 A @ 120 V AC Uses 1 digital output 4 total: two 3-wire (or one 5-wire) RS-232, 1 RS-485, and one 5 V CMOS-compatible (programming) Max. burst rate=CLK/32 Max. sustained rate=burst/2 Screw terminals support max. 14 AWG/1.5 mm2 (standard) Yes Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match registers Yes 9-40 V DC or 24 V AC ±10%, 1.5 W max., power jack -40°C to +70°C 5-95%, non-condensing 3.413” x 4.139” x 0.82” (87 x 105 x 21 mm) 4.9” x 5.6” x 1.1” (124 x 142 x 28 mm) 8 total: Power On, Microprocessor Error, Ethernet Link, Ethernet Activity, 4 Output status $249 / 219 101-0430
U.S. 101-0472 Int’l 101-0476
6 total: Power On, Microprocessor Error, 4 output status $209 / 184 101-0456
U.S. 101-0472 Int’l 101-0476
$199 / 175 101-0455
U.S. 101-0472 Int’l 101-0476
$159 / 140 101-0457
U.S. 101-0472 Int’l 101-0476
$449
$399
$409
$359
1/26/2005
Free Datasheet http://www.datasheet4u.com/
.