ADIS16448

Data Sheet Compact, Precision Ten Degrees of Freedom Inertial Sensor ADIS16448 FEATURES GENERAL DESCRIPTION Triaxial digital gyroscope with digital range scaling ±250°/sec, ±500°/sec, ±1000°/sec settings Axis-to-axis alignment, <0.05° Triaxial digital accelerometer, ±18 g minimum Triaxial digital magnetometer, ±1.9 gauss minimum Digital barometer, 10 mbar to 1200 mbar Calibrated pressure range: 300 mbar to 1100 mbar Autonomous operation and data collection No external configuration commands required 205 ms start-up time Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C SPI-compatible serial interface Burst mode read sequence with optional CRC-16 Embedded temperature sensor Programmable operation and control Automatic and manual bias correction controls Bartlett window FIR length, number of taps Digital I/O: data ready, alarm indicator, general-purpose Alarms for condition monitoring Enable external sample clock input up to 1.1 kHz Single command self test Single-supply operation: 3.15 V to 3.45 V 2000 g shock survivability Operating temperature range: −40°C to +105°C The ADIS16448 iSensor® device is a complete inertial system that includes a triaxial gyroscope, a triaxial accelerometer, a triaxial magnetometer, and pressure sensors. Each sensor in the ADIS16448 combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for ...