SDR-480P

480W Single Output Industrial DIN RAIL with PFC and Parallel Function Features : SDR-480P series Current sharing up to 3840W(7+1) High efficiency 94% and low power dissipation 150% peak load capability Built-in active PFC function, PF>0.94 Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test 150% peak load capability 3 years warranty SE PQ M IF 47 GL SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER PEAK CURRENT PEAK POWER Note.6 OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION SDR-480P-24 24V 20A 0 ~ 20A 480W 30A 720W (3sec.) 120mVp-p 48 ~ 55V 1.0% 0.5% 1.0% 3000ms, 150ms/115VAC at full load SDR-480P-48 48V 10A 0 ~ 10A 480W 15A RIPPLE & NOISE (max.) Note.2 100mVp-p 24 ~ 28V VOLTAGE TOLERANCE Note.3 1.2% 0.5% 1.0% 1500ms, 150ms/230VAC 14ms/230VAC at full load Note.7 90 ~ 264VAC 127 ~ 370VDC 0.99/115VAC at full load 2.5A/230VAC 80A/230VAC http://www.DataSheet4U.com/ 47 ~ 63Hz 0.94/230VAC 94% 5A/115VAC 40A/115VAC <0.6mA / 240VAC Nor...