Quad-Band GSM/GPRS
Freescale Semiconductor Advance Information
Document Number: MMM6035/D Rev. 2.5, 04/2006
MMM6035
MMM6035
Quad-Band GSM...
Description
Freescale Semiconductor Advance Information
Document Number: MMM6035/D Rev. 2.5, 04/2006
MMM6035
MMM6035
Quad-Band GSM/GPRS PA Module with Integrated Power Control
Package Information Plastic Package Case 1561
(6 x 6 mm Module)
Ordering Information
Device MMM6035
Device Marking or Operating
Temperature Range
MMM6035
Package Module
1 Introduction
The MMM6035 is a 50 Ω Power Amplifier module for quad-, tri-, and dual-band GSM handset applications, functioning over the GSM850, EGSM, DCS, and PCS frequency bands. This module is compatible with GSM/GPRS operating modes (up to 50% duty cycle). To simplify radio front-end design requirements, the power control function is integrated, removing the need for directional couplers and detector diodes. GSM burst shaping and power control is integrated on an internal control SmartMOS™ IC. The analog power control signal is smoothed by a low-pass filter included in the internal control SmartMOS chip, allowing over 45 dB dynamic range to be achieved.
The MMM6035 also prevents degradation of switching transients, regardless of battery conditions, due to an internal anti-saturation detection feature. Transmit Enable and Band Select functions are controlled through 0 to 2.8 V logic inputs. These functions are also compatible with 0 to 1.8 V logic inputs.
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Functional Block Diagram . . . . . . . . . . . . . . . 2 3 Electrical Characteristics . . . . . . . . . ...
Similar Datasheet