SS569
Hall Latch - High Sensitivity
Packages
Features and Benefits
– – – – – – – – – Wide operating voltage range from...
SS569
Hall Latch - High Sensitivity
Packages
Features and Benefits
– – – – – – – – – Wide operating voltage range from 2.5V to 24V High magnetic sensitivity – Multi-purpose CMOS technology Low current consumption Chopper-stabilized amplifier stage Output driver with internal pull-up resistor Superior temperature stability Insensitive to physical stress Tiny SOT23 3L or flat SIP 3L both RoHS Compliant packages
3 pin SOT23 (suffix SO)
3 pin SIP (suffix UA)
Functional Block Diagram
VDD
Voltage
Regulator
Application Examples
– – – – – – – Automotive, Consumer and Industrial Solid-state switch Brushless DC motor commutation Speed detection Angular position detection Linear position detection Proximity detection
OUT
www.DataSheet.net/
Chopper
Hall Plate
GND
SIP Package Pin 1 – V DD Pin 2 – GND Pin 3 – OUT SOT Package Pin 1 – V DD Pin 2 – OUT Pin 3 – GND
General Description
The SS569 is a bipolar Hall effect sensor IC fabricated from mixed signal CMOS technology. The device integrates a voltage
regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an output driver with internal pull-up resistor, all in a single package.
It incorporates advanced chopper stabilization techniques to provide accurate and stable magnetic switch points. There are many applications for this HED – Hall Electronic Device - in addition to those listed above. The design, specifications and performance have been optimized for commutation applications in 5V and 12V ...