NIS5232

+12 Volt Electronic Fuse NIS5232 Series The NIS5232 is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. It is designed to buffer the load device from excessive input voltage which can damage sensitive circuits. It also includes an overvoltage clamp circuit that limits the output voltage during transients but does not shut the unit down, thereby allowing the load circuit to continue operation. Features Integrated Power Device Power Device Thermally Protected No External Current Shunt Required 9 V to 18 V Input Range 44 mW Typical Internal Charge Pump Internal Undervoltage Lockout Circuit Internal Overvoltage Clamp ESD Ratings: Human Body Model (HBM); 1500 V Machine Model (MM); 200 V UL2367 Approved (UL File #E466553) These Devices are Pb−Free and are RoHS Compliant Typical Applications Hard Drives Mother Board Power Management DATA SHEET www.onsemi.com 4.2 AMP, 12 VOLT ELECTRONIC FUSE DFN10 CASE 485C MARKING DIAGRAM 1 232 AYWG G Pin 1 2 3 4 5 6−10 11 (flag) Function GND dv/dt Enable/Fault ILIMIT NC SOURCE VCC 232 = Latching Version A = Assembly Location Y = Year W = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the ordering information section on page 10 of this data sheet. © Semiconductor Components Industries, LLC, 2014 1 October, 2022 − ...