SAW Filter
Preliminary
SF2143A
• • • • Designed for SDARS IF Receiver SAW Diplexer 72.54 / 80.46 MHz 11.4 X 5.3 mm Surface-Mount Ca...
Description
Preliminary
SF2143A
Designed for SDARS IF Receiver SAW Diplexer 72.54 / 80.46 MHz 11.4 X 5.3 mm Surface-Mount Case Complies with Directive 2002/95/EC (RoHS)
Pb
72.54/80.46 MHz SAW Diplexer
Value
+10 0 -40 to +105
Absolute Maximum Ratings Rating
Maximum Incident Power in Passband Maximum DC Voltage between any Two Terminals Operating Temperature Range
Units
dBm VDC °C
SM11453-10 Electrical Characteristics TDM1 Filter Characteristic
Nominal Center Frequency 1 dB Bandwidth 15 dB Bandwidth 30 dB Bandwidth Passband Minimum Insertion Loss including the Matching Network Amplitude Ripple, FC ± 1.85 MHz Attenuation Relative to ILMIN 50.00 to 66.48 MHz 66.48 to 68.08 MHz 77.30 to 78.60 MHz 78.60 to 86.50 MHz 86.50 to 91.50 MHz 91.50 to 100.0 MHz Group Delay Ripple Source Impedance (Differential) Load Impedance (Differential)
Sym
FC BW1 BW15 BW30 ILMIN
Notes
1
Min
3.7
Typ
72.54 4.3 5.5 6.0 15.3 0.7 49 42 40 45 61 66 83 27 ohms or 200 ohms 1K ohms or 1.5K ohms
Max
6.7 7.7 18
Units
MHz MHz MHz MHz dB dBP-P dB dB dB dB dB dB nsP-P
40 37 37 40 45 45
www.DataSheet.net/
TDM2 Filter Characteristic
Nominal Center Frequency 1 dB Bandwidth 15 dB Bandwidth 30 dB Bandwidth Passband Minimum Insertion Loss including the Matching Network Amplitude Ripple, FC ± 1.85 MHz Attenuation Relative to ILMIN 50.00 to 74.39 MHz 74.39 to 75.99 MHz 85.21 to 86.50 MHz 86.50 to 91.50 MHz 91.50 to 100.0 MHz Group Delay Ripple Source Impedance (Differential) Load Impedance (Differential) Case Styl...
Similar Datasheet