L99DZ81EP
Door actuator driver
*$3*&)7
TQFP-64
Features
One full bridge for 6 A load (RON = 150 m) One half ...
L99DZ81EP
Door actuator driver
*$3*&)7
TQFP-64
Features
One full bridge for 6 A load (RON = 150 m) One half bridges for 3 A load (RON = 300 m) One configurable high-side driver for up to
1.5 A (RON = 500 m) or 0.35 A (RON = 1600 m) load One configurable high-side driver for 0.7 A (RON = 800 m) or 0.35 A (RON = 1600 m) load
Two high-side drivers for 0.5 A load (RON = 1600 m)
Programmable softstart function to drive loads with higher inrush currents as current limitation value
Very low VS current consumption in standby mode (IS < 6 µA typ; Tj 85°C)
Current monitor output for all high-side drivers
Central two-stage charge pump
Motor bridge driver with full Rdson down to 6 V Device contains temperature warning and
protection
Open-load detection for all outputs
Overcurrent protection for all outputs
Separated half bridges for door lock motor
Programmable PWM control of all outputs
STM standard serial peripheral interface (ST-SPI 3.1)
Prepared for additional fail-safe path for H-bridge
Datasheet - production data
Applications
Door actuator driver with 3 bridges for double door lock control, 4 high-side drivers for bulbs and LEDs control.
H-bridge control for external power
transistors
Description
The L99DZ81EP is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to two DC motors and four grounded resistive loads can be driven with three half bridges and four high-side drivers. Four ex...