NCV7718

NCV7718 Hex Half-Bridge Driver The NCV7718 is a Hex Half−Bridge Driver with protection features designed specifically for automotive and industrial motion control applications. The NCV7718 has independent controls and diagnostics. The device can be operated in forward, reverse, brake, and high impedance states. The drivers are controlled via a 16 bit SPI interface and are daisy chain compatible. Features Low Quiescent Current Sleep Mode High−Side and Low−Side Drivers Connected in a Half−Bridge Configuration Integrated Freewheeling Protection (LS and HS) 0.55 A Peak Current RDS(on) = 1 W (typ) 5 MHz SPI Control Compliance with 5 V and 3. 3 V Systems Undervoltage and Overvoltage Lockout Discriminated Fault Reporting Overcurrent Protection Overtemperature Protection Under Load Detection Daisy Chain Compatible with Multiple of 8 bit Devices 16−Bit Frame Detection These are Pb−Free Devices Typical Applications Automotive Industrial DC Motor Management for HVAC Application www.onsemi.com MARKING DIAGRAM SSOP24 NB CASE 565AL NCV7718 AWLYYWWG NCV7718 = Specific Device Code A = Assembly Location WL = Wafer Lot YY = Year WW = Work Week G = Pb−Free Package ORDERING INFORMATION See detailed ordering and shipping information on page 26 of this data sheet. © Semiconductor Components Industries, LLC, 2012 April, 2018 − Rev. 3 1 Publication Order Number: NCV7718/D NCV7718 Shown below is a typical application for the NCV7718 configuration. Watch...