16SEPC270M

TM 3. SPECIFICATIONS FOR EACH SERIES Conductive polymer type SEPC Series Low ESR, Environmental product This is an even lower ESR series based on our SEP series. Suitable for use with motherboards, servers, VGA, etc. Specifications 1. 2. 3. 4. 5. 6. Items Category temperature range Tolerance on rated capacitance (120Hz) Tangent of loss angle (120Hz) Leakage current (µA/2min) 1 ESR Characteristics at high temp. and low temp. Impedance ratio at 100kHz, +20°C Marking (Purple) : Polarity( ), Rated voltage, Rated Capacitance SANYO, OS-CON, Lot.No. SEPC. 7. Endurance (105°C, 2,000h, Rated voltage applied) 8. Damp heat (Steady state) (60°C, 90% RH, 1,000h, without Load) 9. Resistance to Soldering heat Flow method (260±5°C X 10s) Characteristics -55°C to +105°C M : ±20% Less than or equal to the value of Table3 Less than or equal to the value of Table3 Less than or equal to the value of Table3 -55°C Z / Z 20°C 0.75 to 1.25 +105°C 0.75 to 1.25 Z / Z 20°C Within ±20% ∆C/C 1.5 times or less than an initial standard tanδ 1.5 times or less than an initial standard ESR Below an initial standard Leakage current Within ±20% ∆C/C 1.5 times or less than an initial standard tanδ 1.5 times or less than an initial standard ESR Below an initial standard (after voltage processing) Leakage current Within ±5% ∆C/C Below an initial standard tanδ Below an initial standard ESR Below an initial standard (after voltage processing) Leakage current www.DataSheet.net/ 1 In case of some problems fo...