High-Performance IPD
Featuring built-in protection circuits necessary for compact power source charger circuitry, while also conserving power...
Description
Featuring built-in protection circuits necessary for compact power source charger circuitry, while also conserving power during standby! Overview
High-Performance IPD for Battery Chargers MIP2F× Series
MIP2F× series is a high-performance IPD designed for 20W battery chargers. It features built-in protection circuits necessary for compact power source charger circuitry. This allows a significant reduction in externally connected parts. It provides PWM control when a normal load is applied and intermittent control with low load. This results in greater efficiency for very low to maximum loads, while also conserving power during standby.
Unit : mm
Pin No. Pin Name 1 2 3 4 5 6 7 8 VDD FB CL VCC Drain ⎯ Source Source
Feature
Lowering the liability of input voltage Significantly reduced power consumption with no load 20mW at 100VAC (existing lines:25mW) 20mW at 240VAC (existing lines:30mW) Built-in charge protection circuit Built-in overcurrent, overheating, load shorting and overvoltage protection circuits
www.DataSheet.net/
DIP7-A1
Applications
Chargers (for cellular phones, etc.), AC adapter
Lineup
Characteristic Type No. MIP2F10MS MIP2F20MS MIP2F30MS MIP2F40MS MIP2F50MS Output* Up to 4 W Up to 7 W Up to 10 W Up to 15 W Up to 20 W 700 V VDSS ILIMIT 0.25 A 0.35 A 0.50 A 0.70 A 1.00 A Ron 31 Ω 20 Ω 10 Ω 7Ω 3Ω 100 kHz fosc
* : The electric power mentioned above depends on the transformer specification and ambient conditions. The information should be used only...
Similar Datasheet