PC Camera Controller
Preliminary
SN9C102
PC Camera Controller
1. General Description
The SN9C102 is a single-chip backend processor to pair...
Description
Preliminary
SN9C102
PC Camera Controller
1. General Description
The SN9C102 is a single-chip backend processor to pair with the resolution of VGA or CIF CMOS image sensor. It reads the 9 or 8 bits input raw image data ( RGB Bayer pattern) from an image capturing device and outputs through a USB port into the PC. This chip includes three individual digital color gains setting (named R, G, B gains), an image compression engine, an offset compensation, a hardware windowing with random image size selection, panning and scaling functions. Its multi-powerful functions and special architecture make this chip suitable for extra low cost USB PC camera application.
2. Features
- 9-Bit CMOS image raw data input - Up to 30fps @ CIF, 12fps @VGA for PC mode video - Provide individual R/G/B digital color gains control - Provide snapshoot function - Support pixel offset compensation - Support IC-media, ElecVision, TASC, Hynix, Pixart …etc - Embedded two modes of AE calculation and report - Provide hardware windowing, 1/2, 1/4 scaling function and panning function
www.DataSheet.co.kr
- Support operation mode in image quality/frame rate selection - USB 1.1 comp liance and support suspend mode - USB 4 endpoints: control, isochronous read, bulk read, and bulk write endpoints - Support video data transfer either in USB isochronous or bulk modes - Up to 9 alternated setting for USB isochronous transfer - Up to 64 various P_ID in default mode and Random setting the P_ID, V_ID streaming - 12MHz ...
Similar Datasheet