LVCMOS Spread Spectrum Peak EMI Reduction
www.DataSheet.co.kr
P3P8163A 3.3V, LVCMOS Spread Spectrum Peak EMI Reduction Device
Product Description
P3P8163A is a ...
Description
www.DataSheet.co.kr
P3P8163A 3.3V, LVCMOS Spread Spectrum Peak EMI Reduction Device
Product Description
P3P8163A is a 3.3 V, spread spectrum frequency modulator that generates a 1x, LVCMOS low EMI spread spectrum clock and two reference clock outputs. The P3P8163A reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of down stream clock and data dependent signals. It allows significant system cost savings by reducing the number of circuit board layers, ferrite beads, shielding, and other passive components that are traditionally required to pass EMI regulations. The P3P8163A can generate an EMI reduced clock from a fundamental Crystal or from an external reference clock. P3P8163A has a SEL pin to turn off CLK2 when ‘1’. Refer Output Table. P3P8163A operates over 3.3 V ±5% supply voltage range and is available in 8 pin SOIC package.
Features
http://onsemi.com MARKING DIAGRAM
8 1 SOIC−8 D SUFFIX CASE 751 xx A L Y W G ALYWG G 8
1
= Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package
Input Clock: 12 MHz from Fundamental XTAL or External
Reference Clock Output Clocks: CLK0: 12 MHz ±0.4% CLK1, CLK2: 12 MHz (REFOUT) SEL Pin to Turn Off CLK2 Low Inherent Cycle−to−Cycle Jitter Supply Voltage: 3.3 V ±5% LVCMOS Input and Output Operating Temperature Range: 0°C to 70°C 8−pin SOIC Package These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
ORDERING INFORMATI...
Similar Datasheet