www.DataSheet.co.kr
New Product
SS2P2, SS2P3, SS2P4
Vishay General Semiconductor
High Current Density Surface Mount Schottky Barrier Rectifiers
FEATURES
• Very low profile - typical height of 1.0 mm
eSMP Series
®
• Ideal for automated placement • Low forward voltage drop, low power losses • High efficiency • Low thermal resistance • Meets MSL level 1 per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified
DO-220AA (SMP)
• Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition
PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM EAS VF TJ max. 2.0 A 20 V, 30 V, 40 V 50 A 11.25 mJ 0.50 V 150 °C
MECHANICAL DATA
Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end
TYPICAL APPLICATIONS
For use in low voltage high frequency inverters, freewheeling, DC/DC converters and polarity protection applications.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Non-repetitive avalanche energy at IAS = 1.5 A, L = 10 mH, TJ = 25 °C Voltage rate of change (rated VR) Operating junction and storage temperature range VRRM IF(AV) IFSM EAS dV/dt TJ, TSTG SYMBOL SS2P2 22 20 SS2P3 23 30 2.0 50 11.25 10 000 - 55 to + 150 SS2P4 24 40 V A A mJ V/μs °C UNIT
Document Number: 88910 Revision: 19-Apr-11
For technical questions within your region, please contact one of the following: www.vishay.com
[email protected],
[email protected],
[email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
New Product
SS2P2, SS2P3, SS2P4
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER Maximum instantaneous forward voltage TEST CONDITIONS IF = 2 A IF = 2 A Maximum reverse current at rated VR voltage Typical junction capacitance Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms 4.0 V, 1 MHz TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C SYMBOL VF (1) TYP. 0.50 0.43 8 110 MAX. 0.55 V 0.50 150 15 μA mA pF UNIT
IR (2) CJ
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL RJA Typical thermal resistance RJL
(1) (1)
SS2P2
SS2P3 115 15 20
SS2P4
UNIT
°C/W
RJC (1)
Note (1) Thermal resistance from junction to ambient and junction to lead mounted on PCB with 6.0 mm x 6.0 mm copper pad areas R JL is measured at the terminal of cathode band. RJC is measured at the top center of the body
ORDERING INFORMATION (Example)
PREFERRED P/N SS2P4-M3/84A SS2P4-M3/85A SS2P4HM3/84A (1) SS2P4HM3/85A
(1)
UNIT WEIGHT (g) 0.024 0.024 0.024 0.024
PREFERRED PACKAGE CODE 84A 85A 84A 85A
BASE QUANTITY 3000 10 000 3000 10 000
DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel
Note (1) Automotive grade
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
2.4
50
Average Forward Rectified Current (A)
2.0
Peak Forward Surge Current (A)
130 140 150
40
1.6
30
1.2
20
0.8 TL Measured at the Cathode Band Terminal
0.4
10
0 80 90 100 110 120
0 1 10 100
Lead Temperature (°C)
Number of Cycles at 50 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com 2
For technical questions within your region, please contact one of the following: Document Number: 88910
[email protected],
[email protected],
[email protected] Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
New Product
SS2P2, SS2P3, SS2P4
Vishay General Semiconductor
100
1000
Instantaneous Forward Current (A)
10
TJ = 150 °C
Junction Capacitance (pF)
1.1 1.3
100
1
TJ = 25 °C
TJ = 125 °C 0.1 0.1 0.3 0.5 0.7 0.9 10 0.1 1 10 100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
100 000
1000 TJ = 150 °C
10 000 TJ = 125 °C 1000
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Leakage Current (µA)
100
100 TJ = 25 .