Document
2SC2216,2SC2717
TOSHIBA Transistor Silicon NPN Epitaxial Planar Type
2SC2216,2SC2717
TV Final Picture IF Amplifier Applications
Unit: mm
· High gain: Gpe = 33dB (typ.) (f = 45 MHz) · Good linearity of hFE.
Maximum Ratings (Ta = 25°C)
Characteristics
2SC2216 Collector-base voltage
2SC2717
Collector-emitter voltage
2SC2216 2SC2717
Emitter-base voltage
Collector current
Emitter current
Collector power dissipation
Junction temperature
Storage temperature range
Symbol
VCBO
VCEO
VEBO IC IE PC Tj Tstg
Rating
50 30 45 25 4 50 -50 300 125 -55~125
Unit
V
V
V mA mA mW °C °C
Electrical Characteristics (Ta = 25°C)
JEDEC
TO-92
JEITA
SC-43
TOSHIBA
2-5F1E
Weight: 0.21 g (typ.)
Characteristics
2SC2216 Collector cut-off current
2SC2717
Emitter cut-off current
Collector-emitter breakdown voltage
2SC2216 2SC2717
DC current gain
2SC2216 2SC2717
Collector-emitter saturation voltage
Base-emitter saturation voltage
Collector output capacitance
Collector-base time constant
Transition frequency
Power gain (Figure 1)
2SC2216 2SC2717
Symbol ICBO IEBO
Test Condition
VCB = 50 V, IE = 0 VCB = 30 V, IE = 0 VEB = 3 V, IC = 0
V (BR) CEO IC = 10 mA, IB = 0
hFE VCE = 12.5 V, IC = 12.5 mA
VCE (sat) VBE (sat)
Cob Cc・rbb’
fT
Gpe
IC = 15 mA, IB = 1.5 mA IC = 15 mA, IB = 1.5 mA VCB = 10 V, IE = 0, f = 30 MHz VCB = 10 V, IE = -1 mA, f = 30 MHz VCE = 12.5 V, IC = 12.5 mA
VCC = 12.5 V, IE = -12.5 mA, f = 45 MHz
Min Typ. Max Unit
¾ ¾ 0.1 mA
¾ ¾ 0.1 mA
45 ¾ ¾ 25 ¾ ¾
V
40 ¾ 140
40 ¾ 240
¾ ¾ 0.2 V
¾ ¾ 1.5 V
0.8 ¾ 2.0 pF
¾ ¾ 25 ps
300 ¾
¾ MHz
29 ¾ 36 dB
28 ¾ 36
1 2003-03-27
2SC2216,2SC2717
Figure 1 45 MHz Gpe Test Circuit
2 2003-03-27
2SC2216,2SC2717
3 2003-03-27
2SC2216,2SC2717
4 2003-03-27
2SC2216,2SC2717
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
5 2003-03-27
.