DatasheetsPDF.com

LE24C023M Dataheets PDF



Part Number LE24C023M
Manufacturers Sanyo Semicon Device
Logo Sanyo Semicon Device
Description Two Wire Serial Interface EEPROM
Datasheet LE24C023M DatasheetLE24C023M Datasheet (PDF)

www.DataSheet.co.kr Ordering number : ENA1393B LE24C023M Overview CMOS IC Two Wire Serial Interface EEPROM (2k EEPROM) The LE24C023M is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by incorporating SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol, therefore it is best suited for application that requires small-scale re-writable nonvolatile parameter memory. Functions • Capacity: 2k bits (256 × 8 bit.

  LE24C023M   LE24C023M



Document
www.DataSheet.co.kr Ordering number : ENA1393B LE24C023M Overview CMOS IC Two Wire Serial Interface EEPROM (2k EEPROM) The LE24C023M is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by incorporating SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol, therefore it is best suited for application that requires small-scale re-writable nonvolatile parameter memory. Functions • Capacity: 2k bits (256 × 8 bits) • Single supply voltage: 2.7V to 5.5V • Interface: Two wire serial interface (I2C Bus*) • Operating clock frequency: 400kHz • Low power consumption : Standby: 2μA (max) : Active (Read): 0.5mA (max) • Automatic page write mode: 16 Bytes • Read mode: Sequential read and random read • Erase/Write cycles: 106 cycles • Data Retention: 20 years • High reliability: Adopts SANYO’s proprietary symmetric memory array configuration (USP6947325) Noise filters connected to SCL and SDA pins Incorporates a feature to prohibit write operations under low voltage conditions. • Package : LE24C023M MFP8(225mil) * I2C Bus is a trademark of Philips Corporation. * This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by SANYO Semiconductor Co., Ltd. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 10511 SY/11409 SY/10709 SY 20081113-S00006 No.1393-1/11 Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr LE24C023 Package Dimensions unit:mm (typ) 3032E[LE24C023M] 5.0 8 4.4 6.4 1 (0.6) 2 1.27 0.35 0.15 SANYO : MFP8(225mil) Pin Assignment 0.1 (1.5) 1.7 MAX 0.63 Pin Descriptions PIN.1 NC NC NC GND SDA SCL WP VDD Nonconnected pin Nonconnected pin Nonconnected pin Ground Serial data input/output Serial clock input Write protect Power supply NC NC NC GND 1 2 3 4 8 7 6 5 VDD WP SCL SDA PIN.2 PIN.3 PIN.4 PIN.5 PIN.6 PIN.7 PIN.8 Block Diagram Write controller WP Input buffer Condition detector Serial controller High voltage generator Address generator X decoder SCL EEPROM Array SDA I/O buffer Y decoder & Sense AMP Serial-parallel converter No.1393-2/11 Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr LE24C023 Specifications Absolute Maximum Ratings Parameter Supply voltage DC input voltage Over-shoot voltage Storage temperature Tstg Below 20ns Symbol Conditions Ratings -0.5 to +6.5 -0.5 to +5.5 -1.0 to +6.5 -65 to +150 Unit V V V °C Note: If an electrical stress exceeding the maximum rating is applied, the device may be damaged. Operating Conditions Parameter Operating supply voltage Operating temperature Symbol Conditions Ratings 2.7 to 5.5 -40 to +85 Unit V °C DC Electrical Characteristics Parameter Supply current at reading Supply current at writing Standby current Input leakage current Output leakage current (SDA) Input low voltage Input low voltage (CMOS) Input high voltage Input high voltage (CMOS) Output low voltage Symbol ICC1 ICC2 ISB ILI ILO VIL VILC VIH VIHC VOL IOL=0.7mA, VDD=2.7V IOL=2.0mA, VDD=2.7V VDD*0.8 VDD-0.2 0.2 0.4 f=400kHz f=400kHz, tWC=10ms VIN=VDD or GND VIN=GND to VDD VOUT=GND to VDD -2.0 -2.0 Conditions min VDD=2.7V to 5.5V typ max 0.5 3 2 +2.0 +2.0 VDD*0.2 0.2 mA mA μA μA μA V V V V V V Unit Capacitance/Ta=25°C, f=1MHz Parameter In/Output pin capacitance Input pin capacitance Symbol CI/O CI VI/O=0V (SDA) VI.


LE24C0221M LE24C023M LE24C042M


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)