DatasheetsPDF.com

MCF51JF128 Dataheets PDF



Part Number MCF51JF128
Manufacturers Freescale Semiconductor
Logo Freescale Semiconductor
Description Microcontrollers
Datasheet MCF51JF128 DatasheetMCF51JF128 Datasheet (PDF)

Freescale Semiconductor Data Sheet: Advance Information Document Number: MCF51JF128 Rev. 2, 05/2011 MCF51JF128 Advance Information MCF51JF128 Supports the MCF51JF128VLH, MCF51JF128VHX, MCF51JF128VHS, MCF51JF64VLF, MCF51JF64VHS, MCF51JF32VHS, MCF51JF32VFM Features • Operating characteristics – Voltage range: 1.71 V to 3.6 V – Flash write voltage range: 1.71 V to 3.6 V – Temperature range (ambient): -40°C to 105°C www.DataSheet4U.net • Core – Up to 50 MHz V1 ColdFire CPU – Dhrystone 2.1 perfo.

  MCF51JF128   MCF51JF128



Document
Freescale Semiconductor Data Sheet: Advance Information Document Number: MCF51JF128 Rev. 2, 05/2011 MCF51JF128 Advance Information MCF51JF128 Supports the MCF51JF128VLH, MCF51JF128VHX, MCF51JF128VHS, MCF51JF64VLF, MCF51JF64VHS, MCF51JF32VHS, MCF51JF32VFM Features • Operating characteristics – Voltage range: 1.71 V to 3.6 V – Flash write voltage range: 1.71 V to 3.6 V – Temperature range (ambient): -40°C to 105°C www.DataSheet4U.net • Core – Up to 50 MHz V1 ColdFire CPU – Dhrystone 2.1 performance: 1.10 DMIPS per MHz when executing from internal RAM, 0.99 DMIPS per MHz when executing from flash memory • System – DMA controller with four programmable channels – Integrated ColdFire DEBUG_Rev_B+ interface with single-wire BDM connection • Power management – 10 low power modes to provide power optimization based on application requirements – Low-leakage wakeup unit (LLWU) – Voltage regulator (VREG) • Clocks – Crystal oscillators (two, each with range options): 1 kHz to 32 kHz (low), 1 MHz to 8 MHz (medium), 8 MHz to 32 MHz (high) – Multipurpose clock generator (MCG) • Memories and memory interfaces – Flash memory, FlexNVM, FlexRAM, and RAM – Serial programming interface (EzPort) – Mini-FlexBus external bus interface • Security and integrity – Hardware CRC module to support fast cyclic redundancy checks – Hardware random number generator (RNGB) – Hardware cryptographic acceleration unit (CAU) – 128-bit unique identification (ID) number per chip • Analog – 12-bit SAR ADC – 12-bit DAC – Analog comparator (CMP) containing a 6-bit DAC and programmable reference input – Voltage reference (VREF) • Timers – Programmable delay block (PDB) – Motor control/general purpose/PWM timers (FTM) – 16-bit low-power timers (LPTMRs) – 16-bit modulo timer (MTIM) – Carrier modulator transmitter (CMT) • Communication interfaces – UARTs with Smart Card support and FIFO – SPI modules, one with FIFO – Inter-Integrated Circuit (I2C) modules – USB full/low speed On-the-Go controller with onchip transceiver – Integrated Interchip Sound (I2S) / Serial Audio Interface (SAI) to support full-duplex serial interfaces with frame sync such as AC97 and CODEC • Human-machine interface – Up to 48 EGPIO pins – Up to 16 rapid general purpose I/O (RGPIO) pins – Low-power hardware touch sensor interface (TSI) – Interrupt request pin (IRQ) This document contains information on a new product. Specifications and information herein are subject to change without notice. © 2010–2011 Freescale Semiconductor, Inc. Preliminary Table of Contents 1 Ordering parts...........................................................................3 1.1 Determining valid orderable parts......................................3 2 Part identification......................................................................3 2.1 Description.........................................................................3 2.2 Format...............................................................................3 2.3 Fields......


MC9S12G MCF51JF128 MCF51JU128


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)