Data Sheet
Ultralow Profile, 500 mA, 6 MHz, Synchronous, Step-Down, DC-to-DC Converters
ADP2126/ADP2127
FEATURES
1.20 ...
Data Sheet
Ultralow Profile, 500 mA, 6 MHz, Synchronous, Step-Down, DC-to-DC Converters
ADP2126/ADP2127
FEATURES
1.20 V and 1.26 V fixed output voltage options Clock signal enable
Logic signal enable also available on certain models 6 MHz operating frequency Spread spectrum frequency modulation to reduce EMI 500 mA continuous output current Input voltage: 2.1 V to 5.5 V 0.3 μA (typical) shutdown supply current Pin-selectable power-saving mode Compatible with tiny multilayer inductors Internal synchronous rectifier Internal compensation Internal soft start Output-to-ground short-circuit protection Current-limit protection Undervoltage lockout Thermal shutdown protection 0.330 mm height (maximum), 6-ball BUMPED_CHIP (ADP2126) 0.200 mm height (maximum), 6-pad EWLP (ADP2127)
APPLICATIONS
Mobile phones Digital still/video cameras Digital audio Portable equipment Camera modules Image stabilization systems
GENERAL DESCRIPTION
The ADP2126/ADP2127 are high frequency, step-down, dc-todc converters optimized for portable applications in which board area and battery life are critical constraints. The fixed 6 MHz operating frequency enables the use of tiny ceramic inductors and capacitors and the
regulators use spread spectrum frequency modulation to reduce EMI. Additionally, synchronous rectification improves efficiency and results in fewer external components.
At high load currents, the ADP2126/ADP2127 use a voltage regulating pulse-width modulation (PWM) mode that maintains a constan...