High-Side Power Switch
Data Sheet
FEATURES
Low RDSON of 80 mΩ at 1.8 V Low input voltage range: 1.1 V to 3.6 V 500 mA continuous operating curr...
Description
Data Sheet
FEATURES
Low RDSON of 80 mΩ at 1.8 V Low input voltage range: 1.1 V to 3.6 V 500 mA continuous operating current Built-in level shift for control logic that can be operated
by 1.2 V logic Low 2 μA (maximum) ground current Ultralow shutdown current <0.7 μA Reverse current blocking Ultrasmall 0.8 mm × 0.8 mm × 0.5mm, 4-ball, 0.4 mm
pitch WLCSP
APPLICATIONS
Mobile phones Digital cameras and audio devices Portable and battery-powered equipment
GENERAL DESCRIPTION
The ADP194 is a high-side load switch designed for operation from 1.1 V to 3.6 V and is protected against reverse current flow from output to input. This load switch provides power domain isolation for extended power battery life. The device contains a low on-resistance P-channel MOSFET that supports more than 500 mA of continuous load current and minimizes power loss. The low 2 μA (maximum) ground current and ultralow shutdown current make the ADP194 ideal for battery-operated
Logic Controlled, High-Side Power Switch
ADP194
TYPICAL APPLICATIONS CIRCUIT
ADP194
VIN + – GND
REVERSE POLARITY PROTECTION
VOUT
EN ON
OFF
LEVEL SHIFT AND SLEW
RATE CONTROL
LOAD
Figure 1.
08629-001
portable equipment. The built-in level shifter in the enable logic input makes the ADP194 compatible with modern processors and GPIO controllers.
Beyond operating performance, the ADP194 occupies minimal printed circuit board (PCB) space with an area of less than 0.64 mm2 and a height of 0.50 mm. The ADP194 is available in an ultra...
Similar Datasheet