Programmable Waveform Generator
Data Sheet
FEATURES
Digitally programmable frequency and phase 8.5 mW power consumption at 2.3 V MCLK speed: 16 MHz (B g...
Description
Data Sheet
FEATURES
Digitally programmable frequency and phase 8.5 mW power consumption at 2.3 V MCLK speed: 16 MHz (B grade), 5 MHz (A grade) 28-bit resolution: 0.06 Hz at 16 MHz reference clock Sinusoidal, triangular, and square wave outputs 2.3 V to 5.5 V power supply 3-wire SPI interface Extended temperature range: −40°C to +125°C Power-down option 10-lead LFCSP
APPLICATIONS
Frequency stimulus/waveform generation Liquid and gas flow measurement Sensory applications: proximity, motion,
and defect detection Line loss/attenuation Test and medical equipment Sweep/clock generators Time domain reflectometry (TDR) applications
Low Power, 8.5 mW, 2.3 V to 5.5 V, Programmable Waveform Generator
AD9837
GENERAL DESCRIPTION
The AD9837 is a low power, programmable waveform generator capable of producing sine, triangular, and square wave outputs. Waveform generation is required in various types of sensing, actuation, and time domain reflectometry (TDR) applications. The output frequency and phase are software programmable, allowing easy tuning. The frequency registers are 28 bits wide: with a 16 MHz clock rate, resolution of 0.06 Hz can be achieved; with a 5 MHz clock rate, the AD9837 can be tuned to 0.02 Hz resolution.
The AD9837 is written to via a 3-wire serial interface. This serial interface operates at clock rates up to 40 MHz and is compatible with DSP and microcontroller standards. The device operates with a power supply from 2.3 V to 5.5 V.
The AD9837 has a power-down (sleep)...
Similar Datasheet