Document
SB1520TL..SB15100TL
Type Repetitive peak reverse voltage Surge peak reverse voltage Max. reverse recovery time Max. forward voltage Max. forward voltage
www.DataSheet4U.com
VRRM V
SB 1520TL SB 1530TL 20 30 40 45 50 60 90
VRSM V
20 30 40 45 50 60 90 100
trr1) ns
-
VF2) V
0,43 0,43 0,43 0,43 0,6 0,6 0,74 0,74
VF3) V
0,52 0,52 0,52 0,52 -
Axial Lead Diode
Schottky barrier rectifier diodes
Forward Current: 15 A Reverse Voltage: 20 to 100 V SB1520TL..SB15100TL Features
• Max. solder temperature: 260°C • Plastic material has UL classification 94V-0 • Electrostatic discharge immunity test IEC 1000-4-2 (C=150 pF, R=150 Ohm): voltage class 20 kV
SB 1540TL SB 1545TL SB 1550TL SB 1560TL SB 1590TL
SB 15100TL 100
Absolute Maximum Ratings Symbol
IFAV IFRM IFSM i2t Tj Tj Tstg
Conditions
R-load, 4), Ta = 50 °C f > 15 Hz, 4) half sinus-wave Ta = 25 °C Ta = 25 °C tp = 10 ms tp = 8.3 ms tp = 10 ms tp = 8.3 ms
Values
15 60 350 613 -50 ... +150 -50 ... +200 -50 ... +175
Unit
A A A A A²s A²s °C °C °C
Ta = 25 °C, unless otherwise specified
Operating junction temperature DC forward (bypass) mode 5) Storage temperature
Typical Applications*
• Designed as Bypass Diodes for Solar Panels, protection application
Mechanical Data
• Plastic case: 8 x 7,5 [mm] • Weight approx.: 2 g • Terminals: plated terminals solderable per MIL-STD-750 • Mounting position: any • Standard packaging: 500 pieces per ammo or 1000 pieces per reel
Characteristics Symbol
IR IR Cj ERSM Rthja RthjL
Conditions
Tj = 25 °C, VR = VRRM Tj = 100 °C, VR = VRRM at 1 MHz and applied reverse voltage of 4 V L = 60 mH, Tj = 25 °C, inductive load switched off
4) 6)
min.
typ.
max.
500 25
Unit
µA mA pF mJ
Ta = 25 °C, unless otherwise specified
1.8
Footnotes
1) 2)
IF = - A, IR = - A, IRR = - A IF = 5 A, Tj = 25 °C 3) IF = 15 A, Tj = 25 °C 4) Valid, if leads are kept at TA at a distance of 0 mm from case 5) Max. junction temperature Tj ≤200 °C in bypass mode / DC forward mode 6) Thermal resistance from junction to lead/ terminal at distance 0 mm from case
K/W K/W
Diode © by SEMIKRON Rev. 2 – 21.01.2011 1
SB1520TL..SB15100TL
Fig.1: Forward characteristics (typical value)
Fig.2: Rated forward current vs. ambient temperature 1)
Fig.3: Thermal resistance versus distance from case
2
Rev. 2 – 21.01.2011
© by SEMIKRON
SB1520TL..SB15100TL
Case: 8 x 7,5 [mm]
This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff.
© by SEMIKRON
Rev. 2 – 21.01.2011
3
.