NBLVEP16VR

NBLVEP16VR 2.5V/3.3V/5V ECL Differential Receiver/Driver with Oscillator Gain Stage and Enabled High Gain Outputs The NBLVEP16VR is an ECL/LVPECL oscillator gain stage with high−gain output buffers, selectable output enable and a feedback buffer. The NBLVEP16VR is a solution for crystal oscillators and SAW−based voltage−controlled oscillators. Q and Q Outputs have Selectable 4 mA or 8 mA, Self Bias Current Sources QHG and QHG have a Selectable 10 mA, Self Bias Current Sources Synchronous Output Enable of the High−Gain Outputs with Selectable Disabled State Selectable LVCMOS/LVTTL or LVPECL Level Input of the Output Enable Pin Maximum Frequency > 2.5 GHz Typical (LV)PECL Mode Operating Range: VCC = 2.375 V to 5.5 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = −2.375 V to −5.5 V Temperature Compensated Inputs and Outputs Excellent Clock Input Sensitivity VBB Output Supports Current Source/Sink Capability up to a Robust 1.5 mA http://onsemi.com MARKING DIAGRAM Bottom View QFN−16 MN SUFFIX CASE 485G XXXX A L Y W XXXX XXXX ALYW = Device Code = Assembly Location = Wafer Lot = Year = Work Week ORDERING INFORMATION Device NBLVEP16VRMN NBLVEP16VRMNR2 Package QFN−16 QFN−16 Shipping† 123 / Rail 3000/ Tape & Reel Refer to Note 1. NBWLVEP16VR Wafer 1. Contact Sales Representative. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications 4 mA ea. (opt.)...