SMT Hybrid Coupler
SMT Hybrid Coupler 3dB 90°.
The content of this specification may change without notification 09/18/08
EIA SIZE 1206 LL...
Description
SMT Hybrid Coupler 3dB 90°.
The content of this specification may change without notification 09/18/08
EIA SIZE 1206 LLHB31B4-1915-G (1850~1980MHz)
Dimensions / Schematics
Top View
1.6±0.2
Bottom View
0.55 ± 0.15
IN
*1: This Product is made with RoHS. [ Recommended Temperture Profile ]
OUT 1
3.0 ± 0.2
3.2 ± 0.2
0.45 ± 0.15 0.325 ± 0.15
Unit : mm
OUT 2
TERMINATION : GN
50Ω GND
Side View
ort
,
1.0 ± 0.1
OUT 1 GND OUT 2
IN *2: The termination resistor in 50 ohm does not reside in this hybrid. GND TERMINATION
Transmission / VSWR / Phase Data
Transmission
[dB] 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 1850 1915 1980 [MHz] 1.7
VSWR
Phase
[deg.] 93 92 91
INS-LOSS OUT2
INS-LOSS OUT1
1.6 1.5 1.4
ISOLATION
1.3 1.2 1.1 1.0 1850 1915
OUT2 Port OUT1 Port INPUT Port
1980 [MHz]
90 89 88 87 1850 1915 1980 [MHz]
Specification
Style No. Frequency Range Nominal In/Out Z0 Insertion Loss Isolation Amplitude Balance Phase Deviation In / Out VSWR LLHB31B4-1915-G 1850 ~ 1980 MHz 50Ω 4.0 dB max. 15 dB min. 1.0 dB max. 90 3 deg. 3W −40 ~ +85 C 1.5 max.
Recommended Pad Size
1.25 Unit : mm
www.DataSheet4U.com
Max. Input Power Working Temp. Range
0.6 1.0 1.6
LAND PATTERN SOLDER RESIST NO PATTERN + SOLDER RESIST φ0.3 through hole
The frequency range shown above is just an example, but the frequency bandwidth can be complied on a custom basis. Please consult with us, if any.
2.8 5.72
American Accurate Components, Inc.
188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949...
Similar Datasheet