S11059-01WT

Color sensor S11059-01WT I2C interface-compatible color sensor The S11059-01WT is a color sensor that supports the I2C (inter-integrated circuit) interface. It is sensitive to red (O=615 nm), green (O=530 nm), blue (O=460 nm), and infrared (O=855 nm) light, and outputs detected results as 16-bit digital data for each color. The photodiode for each color is automatically switched sequentially to perform measurements. The sensitivity and integration time can be adjusted so that light measurements can be performed over a wide range. Features I2C interface compatible Sequential measurements of red, green, blue, and infrared light 2-step sensitivity switching (sensitivity ratio 1 : 10) Sensitivity adjustment by setting the integration time Low voltage (2.5 V or 3.3 V) operation Low current consumption: 75 NjA typ. Small package (WL-CSP: wafer level-chip size package) Internal infrared-cut ¿lter Wide dynamic range (Low gain: 1 to 10 klx) Feature Applications LCD backlight adjustment for cell phones, notebook PC, etc. Energy-saving sensor for large-size TV, etc. Various types of light detection or color adjustment The sensor supports the 01 I C interface-compatible to allow direct connection to micro-controller 2 I 2C Feature interface and so can exchange data The WL-CSP measures only 1.18 × 1.68 × 0.58 mm and lead-free reÀow solder (260 °C) can be used. 02 WL-CSP makes the device even smaller and highly reliable with the micro-controller using two signal lines jointly usab...