Document
LIGITEK ELECTRONICS CO.,LTD. www.DataSheet4U.com Property of Ligitek Only AXIAL TYPE LED LAMPS
LUR9353H
DATA SHEET
DOC. NO REV DATE
: :
QW0905-LUR9353H A
: 06 - Apr. - 2007
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LUR9353H
www.DataSheet4U.com
Page 1/6
Package Dimensions
6.0MIN
3.0
6.0MIN
0.5
2.2
+
-
1.54
Note : 1.All dimension are in millimeter tolerance is ± 0.25mm unless otherwise noted. 2.Specifications are subject to change without notice.
Directivity Radiation
0° -30° 30°
-60°
60°
100% 75% 50%
25%
0
25% 50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LUR9353H
www.DataSheet4U.com
Page 2/6
Absolute Maximum Ratings at Ta=25 ℃
Ratings Parameter Symbol UR(H) Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge( * ) Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 50 100 130 10 2000 -40 ~ +85 -40 ~ +100 mA mA mW UNIT
μA V ℃ ℃
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic * glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded.
Typical Electrical & Optical Characteristics (Ta=25 ℃)
COLOR PART NO MATERIAL Emitted
LUR9353H
Forward Dominant Spectral voltage wave halfwidth @20mA(V) length △λ nm λDnm
Luminous intensity
@20mA(mcd)
Viewing angle 2θ 1/2 (deg)
Lens
Water Clear
Min. Max. Min. Typ. 630 20 1.7 2.6 320 500 120
AlGaInP/GaP Red
Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LUR9353H
www.DataSheet4U.com
Page 3/6
Typical Electro-Optical Characteristics Curve
UR(H) CHIP
Fig.1 Forward current vs. Forward Voltage
1000
Fig.2 Relative Intensity vs. Forward Current
3.5
Forward Current(mA)
100 10
Relative Intensity Normalize @20mA
1.0 1.5 2.0 2.5 3.0
3.0 2.5 2.0 1.5 1.0 0.5 0.0 1 10 100 1000
1 01
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
1.2
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
Forward Voltage@20mA Normalize @25℃
Relative Intensity@20mA Normalize @25℃
3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
1.1
1.0 0.9
0.8 -40 -20 0 20 40 60 80 100
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Fig.5 Relative Intensity vs. Wavelength
Relative Intensity@20mA
1.0
0.5
0.0 550 600 650 700
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
www.DataSheet4U.com
PART NO. LUR9353H Soldering Iron:
Page 4/6
Basic spec is ≦5 sec when 260℃. If temperature is higher, time should be shorter(+10 ℃ → -1sec). Power dissipation of iron should be smaller than 15W,and temperature should be controllable. Surface temperature of the device should be under 230 ℃.
Soldering heat
Soldering heat Max. 260 ℃ 245± 5℃ within 5 sec Preheat
120 ~ 150℃
120 .