ULTRA-SENSITIVE HALL EFFECT SWITCH
AH1884
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH
Description
Pin Assignments
AH1884 is with two Hall effect plat...
Description
AH1884
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH
Description
Pin Assignments
AH1884 is with two Hall effect plates and dual CMOS output driver, mainly designed for battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The total operation power is down to 15uW in the 1.8V supply.
Either north or south pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (low), the output is held until B is lower than release point (Brp), then turned off.
( Top View )
Out 2 1
5 Out 1
GND 2
NC 3
4 Vdd
SOT553
Features
Applications
Micropower operation Operation with North or South Pole 1.65V to 3.3V battery operation Chopper stabilized
Superior temperature stability Extremely Low Switch-Point Drift Insensitive to Physical Stress Good RF noise immunity -40°C to 85°C operating temperature ESD > 4KV in human body mode Package: SOT553 “Green” Molding Compound
Typical Application Circuit
Cellular phone PDA Cordless phone
Vdd
AH1884
Document number: DS31171 Rev. 6 - 2
AH1884 GND
Output 1 Output 2
1 of 7 www.diodes.com
September 2010
© Diodes Incorporated
Pin Descriptions
AH1884
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH
Pin Name
Out 2 GND NC Vdd Out 1
P/I/O O P/I
P/I O
Pin #
1 2 3 4 5
Description
Output Pin ( active High ) Ground No Connection Power Supply ...
Similar Datasheet