MT9D012

MT9D012: 1/4-Inch 2Mp CMOS Digital Image Sensor Features www.DataSheet4U.com Aptina 1/4-Inch 2Mp CMOS Digital Image Sensor MT9D012 For the latest data sheet, refer to Aptina’s Web site: www.aptina.com Features DigitalClarity® CMOS imaging technology Low dark current Simple two-wire serial interface Auto black level calibration Support for external mechanical shutter Support for external LED or xenon flash High frame rate preview mode with arbitrary downsize scaling from maximum resolution Programmable controls: gain, frame size/rate, exposure, left–right and top–bottom image reversal, window size and panning SMIA-compatible Data interfaces: parallel and CCP2 compliant sublow-voltage differential signalling (sub-LVDS) On-chip phase-locked loop (PLL) oscillator Bayer-pattern down-size scaler Integrated color/lens shading correction Superior low-light performance Table 1: Parameter Key Performance Parameters Value 1/4-inch UXGA (4:3) 3.55mm(H) x 2.68mm(V) 4.45mm diagonal 1616H x 1216V 2.2 x 2.2μm RGB Bayer pattern Electronic rolling shutter (ERS) 64 Mp/s at 64 MHz PIXCLK Programmable up to 23 fps Programmable up to 60 fps 10-bit, on-chip (61dB) 0.53 V/lux-sec 59.5dB 37.7dB 2.40–3.10V (2.80V nominal) 1.70–1.90V (1.80V nominal) 1.70–1.90V (serial) 1.70–3.10V (parallel) 185mW, 23 fps (full resolution) –30°C to +70°C Bare die Optical format Active imager size Active pixels Pixel size Color filter array Shutter type Maximum data rate/ master clock F...