MRF150

MRF150 RF Power FET 150W, to 150MHz, 50V Designed primarily for linear large-signal output stages up to 150 MHz Superior high order IMD IMD(d3) (150W PEP): –32dB (Typ.) IMD(d11) (150W PEP): –60dB (Typ.) Specified 50V, 30MHz characteristics Output power = 150 Watts Power gain = 17 dB (Typ.) Efficiency = 45% (Typ.) 100% tested for load mismatch at all phase angles M/A-COM Products Released - Rev. 9 Product Image 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DataSheet4U MRF150 RF Power FET 150W, to 150MHz, 50V M/A-COM Products Released - Rev. 9 2...