(MIP2Kx) High-Performance IPD
Featuring built-in frequency jitter necessary for EMI, while also conserving power during standby!
High-Performance IPD...
Description
Featuring built-in frequency jitter necessary for EMI, while also conserving power during standby!
High-Performance IPD with Frequency Jitter for Small Charger/Adapter: MIP2Kx Series
Overview
MIP2Kx series is a high-performance IPD designed for 15W battery chargers and featuring built-in frequency jitter function at PWM control. It features built-in protection circuits necessary for compact power source charger circuitry. This allows a significant reduction in externally connected parts. It provides PWM control when a normal load is applied and intermittent control with low load. This results in greater efficiency for very low to maximum loads, while also conserving power during standby.
Unit : mm
Pin No. Pin Name 1 VDD 2 FB 3 4 5 6 7 8 CL VCC Drain ⎯ Source Source
Feature
Built-in jitter function Built-in charge protection circuit Built-in overcurrent, overheating, load shorting and overvoltage protection circuits
Applications
Chargers (for DSC, etc.), AC adapter
DIP7-A1
Lineup
Type No. MIP2K2 MIP2K3 MIP2K4 MIP2K5 *2 Output *1 Up to 5W Up to 8W Up to 10W Up to 15W 700V Characteristic VDSS ILIMIT 0.35A 0.50A 0.70A 1.0A R(DS)ON 16.5Ω 10Ω 7Ω 5Ω 100kHz 5.5kHz 260Hz DIP7-A1 fosc ⊿f fM Package
*1 The electric power mentioned above depends on the transformer specification and ambient conditions. The information should be used only as a guide. When using it within a case, output electric power may be decided by heat of IPD. *2 All characteristic values are only fo...
Similar Datasheet