MP8798

MP8798 CMOS Very Low Power, 1 MSPS 10-Bit Analog-to-Digital Converter with 4-Channel Mux FEATURES 10-Bit Resolution 4-Channel Mux Sampling Rates from <1 kHz to 1 MHz Very Low Power CMOS - 30 mW (typ) Power Down; Lower Consumption – 3 mW (typ) Input Range between GND and VDD No S/H Required for Analog Signals less than 100 kHz No S/H Required for CCD Signals less than 1 MHz Single Power Supply (4 to 6 Volts) Latch-Up Free High ESD Protection: 4000 Volts Minimum 3 V Version: MP87L98 BENEFITS Reduced Board Space (Small Package) Reduced External Parts, No Sample/Hold Needed Suitable for Battery & Power Critical Applications Designer can Adapt Input Range & Scaling µP/DSP Interface and Control Applications High Resolution Imaging – Scanners & Copiers Wireless Digital Communications Multiplexed Data Acquisition APPLICATIONS GENERAL DESCRIPTION The MP8798 is a flexible, easy to use, precision 10-bit Analog-to-Digital Converter with 4-channel mux that operates over a wide range of input and sampling conditions. The MP8798 can operate with pulsed “on demand” conversion operation or continuous “pipeline” operation for sampling rates up to 1 MHz. The elimination of the S/H, requirements, very low power, and small package size offer the designer a low cost solution. No sample and hold is required for charge couple device applications, up to 1 MHz, or multiplexed input applications when the signal source bandwidth is limited to 100 kHz. The input...