THE
FULL RANGE OF FERRITE BEADS LARGE ASSORTMENT OF FERRITE CLAMPS
EMI SUPPRESSION DEVICES
ALLPOWER SOURCE
ATTENUATI...
THE
FULL RANGE OF FERRITE BEADS LARGE ASSORTMENT OF FERRITE CLAMPS
EMI SUPPRESSION DEVICES
ALLPOWER SOURCE
ATTENUATION OF CONDUCTED NOISE FLAT CABLE CLAMPS COMMON MODE BALUNS FERRITE BEADS D-SUBCONNECTOR NOISE SUPPRESSORS
ALLPOWER DIVISION
TECHNOLOGY DYNAMICS INC. 100 School Street, Bergenfield, NJ 07621 Phone: (201) 385-0500, Fax: (201) 385-0702
www.theallpower.com
www.DataSheet.in
ALLP WER
SOURCE
THE
IRON POWDER CORES
1. Applications and Characteristics: If the design frequency is below 300KHz, the preferred choice of RF circuits for the iron powder core are: DC power supply chokes, motors, dimmer control filteres and other EMI/RFI circuits.
2. Temperature Effects: The iron powder core is well suited from -55°C to +125°C. Because the iron powder core does not have a low curie temperature it will function to several hundred degrees Celcius. However, continued operation above 200°C may result in a permanent shift in characteristic. EPOXY COATING: 94V-0 COLOR CODE: YELLOW/WHITE
5. Iron Powder Material Properties
PROPERTY Initial Permeability Curie Temperature Pratical Frequency Range Specific Gravity Temperature Stability (+)
UNIT
SYBOL mi
26 75 >300 1-300
o
C
Tc
KHZ d Ppm/oC
6.7 780
THE
ALLPOWER SOURCE
DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702
[email protected]
100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500
www. theallpower.com
26
www.DataSheet.in
ALLP WER
SOURCE
THE
MN-ZN TOROID CORES
Symbols Definitions Effec...