CONNECTOR
PA
2.0mm
(.079") pitch
FAMILY SERIES/PA•PAF•PAL CONNECTOR
Features ––––––––––––––––––––––––
• Secure locking device
The...
Description
PA
2.0mm
(.079") pitch
FAMILY SERIES/PAPAFPAL CONNECTOR
Features ––––––––––––––––––––––––
Secure locking device
The housing has a locking device to prevent accidental disconnection because of routing of wires or of vibration, and also reverse and different circuit numbers mating.
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)
Interchangeable between crimp and IDC socket
Both crimp and IDC sockets use the same headers and wire-towire mating halves.
Secondary retainers
Secondary retainers enhance safety in case of partial insertion or accidental release of the contact.
Harness variation
PAL, wire-to-wire crimp style connector, increases wire harness variation.
PA connector (Standard type, Retainer mountable type) Highly reliable contact
Based upon wire-to-board crimp style PA connectors, the PA series family of connector have been expanded to meet the requirement of complex wire harness of 2.0mm (.079") pitch connectors with secure locking mechanism thanks to the additional line up of wire-to-board IDC style PAF connectors and wire-to-wire crimp style PAL connectors.
The box contact supplies stable contact performance even under conditions of vibration, distortion, low voltage or low current.
Insertion guide mechanism
Header has housing insertion guides for easy and secure insertion.
Flanged press pin
Top entry type header has flanged press pins, preventing accidental removal of the pins that might result from the distorted unmating e...
Similar Datasheet