Document
PA
2.0mm
(.079") pitch
FAMILY SERIES/PA•PAF•PAL CONNECTOR
Features ––––––––––––––––––––––––
• Secure locking device
The housing has a locking device to prevent accidental disconnection because of routing of wires or of vibration, and also reverse and different circuit numbers mating.
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)
• Interchangeable between crimp and IDC socket
Both crimp and IDC sockets use the same headers and wire-towire mating halves.
• Secondary retainers
Secondary retainers enhance safety in case of partial insertion or accidental release of the contact.
• Harness variation
PAL, wire-to-wire crimp style connector, increases wire harness variation.
PA connector (Standard type, Retainer mountable type) • Highly reliable contact
Based upon wire-to-board crimp style PA connectors, the PA series family of connector have been expanded to meet the requirement of complex wire harness of 2.0mm (.079") pitch connectors with secure locking mechanism thanks to the additional line up of wire-to-board IDC style PAF connectors and wire-to-wire crimp style PAL connectors.
The box contact supplies stable contact performance even under conditions of vibration, distortion, low voltage or low current.
• Insertion guide mechanism
Header has housing insertion guides for easy and secure insertion.
• Flanged press pin
Top entry type header has flanged press pins, preventing accidental removal of the pins that might result from the distorted unmating especially in the case of small No. of circuits.
PAF connector • The industry’s first secure lock IDC connectors
Retainer PA Receptacle (Crimp style Standard type)
Retainer
PAF Receptacle (IDC style)
Retainer
PA Receptacle (Crimp style Retainer mountable type)
By separating ID section and secure lock section, the industry’s first secure lock specification has been achieved for IDC that was said to be impossible. Our fully automatic IDC machines, BCD-M5BP (for simple harness) and CAM-M12B, SAD-M12E (for multiharness), can be applied for harness making.
PA Shorouded header (Top entry type)
• Metallic strain relief
PA Shorouded header (Side entry type) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAL (Crimp style Wire-to-wire)
Metallic strain relief on the contact securely grips wire insulation that can avoid direct stress of vibration or impact. The same grip strength as insulation barrel of crimp style contact could be achieved.
• Retainer with four locking points
The new four locking points design ensures wire retention force of every direction that is almost superior to contact retention force of crimp style connectors. It also completely covers exposed terminated ID contact.
Retainer
* Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details.
PAL connector • The industry’s first wire to wire 2.0mm (.079") pitch retainer mountable type connector. • Either with or without panel lock can be selected according to application.
Standards ––––––––––––––––––––––
1
0
Recognized E60389
Certified LR20812
61
www.DataSheet.in
PA
FAMILY SERIES /PA•PAF•PAL CONNECTOR
List of combinations ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Crimp style Standard type
Contact SPHD-001T-P0.5 SPHD-002T-P0.5 Housing PAP-( )V-S Shrouded header Shrouded header
Top entry type
Side entry type
High box type
Crimp style Retainer mountable type
Contact SPA-001T-P0.5 Housing PARP-( )V Retainer PMS-( )V-S Shrouded header
SMT type Top entry type Side entry type
Insulation displacement type
Receptacle ( )PAF-6S Retainer PAFS-( )V-S Receptacle housing Contact
Wire to wire Connectors
Retainer
Specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
PA Connector (Standard type)
• Current rating: 3A AC, DC (AWG#22) • Voltage rating: 250V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 800V AC/minute • Applicable wire: AWG #28 to #22 • Applicable PC board thickness: 1.6mm(.063")
PAF Connector
• Current rating: 1.0A AC, DC (AWG#26) • Voltage rating: 100V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/15m Ω max. After environmental testing/25m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 800V AC/minute • Applicable wire: UL1061(Contact JST for details regarding other UL wires.) AWG #26 Conductor/7 strands, tin-coated annealed copper Insulation O.D./0.9 to 1.0mm(.035" to .039")
PA Connector (Retainer mountable type)
• Current rating: 3A AC, DC (AWG#22) • Voltage rating: 100V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrica.