DatasheetsPDF.com

SC16C850L Dataheets PDF



Part Number SC16C850L
Manufacturers NXP Semiconductors
Logo NXP Semiconductors
Description parallel bus interface
Datasheet SC16C850L DatasheetSC16C850L Datasheet (PDF)

SC16C850L 1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode parallel bus interface Rev. 04 — 13 December 2007 Product data sheet 1. General description The SC16C850L is a 1.8 V, low power, single channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. The SC16C850L is fun.

  SC16C850L   SC16C850L



Document
SC16C850L 1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode parallel bus interface Rev. 04 — 13 December 2007 Product data sheet 1. General description The SC16C850L is a 1.8 V, low power, single channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. The SC16C850L is functionally (software) compatible with the SC16C650B. SC16C850L can be programmed to operate in extended mode (see Section 6.2) where additional advanced UART features are available. The SC16C850L UART provides enhanced UART functions with 128-byte FIFOs, modem control interface, and IrDA encoder/decoder. On-board status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by software to meet specific user requirements. An internal loopback capability allows on-board diagnostics. The SC16C850LIBS with Intel (16 mode) or Motorola (68 mode) bus host interface operates at 1.8 V and is available in a very small (Micro-UART) HVQFN32 package. The SC16C850LIET with Intel (16 mode) bus host interface operates at 1.8 V and is available in a very small TFBGA36 package. 2. Features I I I I I I I I I I I I I I I I Single channel high performance UART Intel or Motorola bus interface selectable using 16/68 pin 1.8 V operation Up to 5 Mbit/s data rate 128-byte transmit FIFO to reduce the bandwidth requirement of the external CPU 128-byte receive FIFO with error flags to reduce the bandwidth requirement of the external CPU 128 programmable Receive and Transmit FIFO interrupt trigger levels 128 Receive and Transmit FIFO reporting levels (level counters) Automatic software (Xon/Xoff) and hardware (RTS/CTS or DTR/DSR) flow control Industrial temperature range (−40 °C to +85 °C) 128 hardware and software trigger levels Automatic 9-bit mode (RS-485) address detection Automatic RS-485 driver turn-around with programmable delay UART software reset High resolution clock prescaler, from 0 to 15 with granularity of 1⁄16 to allow non-standard UART clock to be used Programmable Xon/Xoff characters www.DataSheet.in NXP Semiconductors SC16C850L 1.8 V single UART with 128-byte FIFOs and IrDA encoder/decoder I I I I I I I Software selectable baud rate generator Support IrDA version 1.0 (up to 115.2 kbit/s) Standard modem interface or infrared IrDA encoder/decoder interface Enhanced Sleep mode and low power feature Modem control functions (CTS, RTS, DSR, DTR, RI, CD) Independent transmitter and receiver enable/disable Pb-free, RoHS compliant package offered 3. Ordering information Table 1. Ordering information Package Name SC16C850LIBS SC16C850LIET HVQFN32 TFBGA36 Description Version plastic thermal enhanced very thin quad flat package; SOT617-1 no leads; 32 terminals; body 5 × 5 × 0.85 mm plastic thin fine-.


SC16C850 SC16C850L SC16C850SV


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)