Document
RoHS compliance
Solid Electrolytic Capacitors with Polymerized Organic Semiconductor
TQCSeries
*
High Voltage Products
Fe a tu re TQC series is perfect for high voltage, low ESR and low profile applications. It is the most suitable for pass-con of the motor driver by 12V, the input of the DCDC converter.
Peak temperature 250˚C lead free reflow soldering products. (See P17) Please contact us, if your reflow condition exceeds this condition.
Specifications
Items
Operating Temperature range Rated capacitance range Capacitance tolerance Rated voltage Dissipation Factor (D.F.) Leakage current (µA) Equivalent series resistance (E.S.R. mΩmax.) Temperature characteristics of Impedance ratio Endurance
Condition
— 120Hz/20°C 120Hz/20°C — 120Hz/20°C Rated voltage applied, after 5 minutes 100kHz/20°C 100kHz/+20°C
25TQC15M,25TQC22M (category voltage applied), 20TQC22M,16TQC33M,16TQC47M (rated voltage applied) 25TQC5R6M,25TQC33M,25TQC22MV,25TQC15MV,25TQC10M (category voltage applied), 20TQC8R2M,20TQC47M,16TQC10M,16TQC68M,20TQC15M,16TQC22M, 20TQC22MV,20TQC33MV,16TQC33MV,16TQC47MV (rated voltage applied)
Characteristics
–55 to +105 (°C) 5.6 to 68 (µF) _ 20% M:+ 16 to 25 (V.DC) ≤ 10.0 (%) ≤ 0.1CV B2size: ≤ 0.3CV Please see the attached characteristics list –55°C Z/Z20°C 1.0 to 2.0 +105°C 0.6 to 1.0 Z/Z20°C _ 20% of the initial value ∆C/C Within+
*
105°C,2000h 105°C,1000h
tan L.C. ∆C/C tan L.C. ∆C/C tan L.C.
≤ 1.5 times the initial limit ≤ The initial limit Within+40%, –20% of the initial value ≤ 1.5 times the initial limit ≤ 3 times the initial limit _ 5% of the initial value Within+ ≤ The initial limit ≤ 3 times the initial limit
(unit: mm)
Damp heat (Steady state) Surge
60°C,90to95%RH,500h, No voltage applied 15to35°C,1000 times, 1kΩdischarge resistance, surge voltage applied
Dimensions
L
Size code B2 C D2 D3L
L*1 (±0.2)
3.5 6.0 7.3 7.3
W (±0.2)
2.8 3.2 4.3 4.3
H*2 (±0.1)
1.9 2.8 1.9 2.8
S (±0.2)
0.8 1.3 1.3 1.3
W1 (±0.1)
2.2 1.8 2.4 2.4
W
Size List
RV
(SV)
*1 ±0.3:D3L *2 ±0.2:C,D3L
20 (23)
B2
H
µF
16 (20)
25 (29)
B2
S
S
W1
Characteristics List
Size SANYO code Part number
25TQC5R6M 20TQC8R2M 16TQC10M 25TQC10M 20TQC15M 16TQC22M 25TQC22M 25TQC22MV 25TQC15M 25TQC15MV 20TQC22M 16TQC33M 16TQC47M 25TQC33M 20TQC47M 16TQC68M 25*4 20 16 25*4 20 16 25*4 25*4 25*4 25*4 20 16 16 25*4 20 16 85 105 105 85 105 105 85 85 85 85 105 105 105 85 105 105 5.6 8.2 10 10 15 22 22 22 15 15 22 33 47 33 47 68 20 20 20 20 20 20 20 105 105 105 105 105 105 105 -
5.6 8.2 10 15 22 33 47 68
B2 C D2 D2 D3L C D2 D3L
C D2 D2 D3L
E.S.R. Maximum allowable Rated Category Category L.C. Rated Rated MSL D.F. ripple current (µA) (mΩmax.) (mArms) Voltage Temperature Capacitance Voltage Temperature Reflow Reflow (%max.) Temp. (V) (°C) (µF) (V) (°C) max./5min. 100kHz/20°C 100kHz*3 ≤Temp. 260°C ≤ 250°C
10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 42.0 49.2 48.0 25.0 30.0 35.2 44.0 55.0 38.0 38.0 44.0 52.8 75.2 82.5 94.0 108.8 100 100 100 .