HCSL Clock Generator
NB3N3002
3.3V, Crystal to 25MHz,
100MHz, 125MHz and
200MHz HCSL Clock
Generator
Description The NB3N3002 is a precision...
Description
NB3N3002
3.3V, Crystal to 25MHz,
100MHz, 125MHz and
200MHz HCSL Clock
Generator
Description The NB3N3002 is a precision, low phase noise clock generator that
supports PCI−Express and Ethernet requirements. The device accepts a 25 MHz fundamental mode parallel resonant crystal and generates a differential HCSL output at 25 MHz, 100 MHz, 125 MHz or 200 MHz clock frequencies. Outputs can interface with LVDS with proper termination (See Figure 5).
This device is housed in 5.0 mm x 4.4 mm narrow body TSSOP 16 pin package.
Features
Uses 25 MHz Fundamental Mode Parallel Resonant Crystal External Loop Filter is Not Required HCSL Differential Output or LVDS with Proper Termination For Selectable Multipliers of the Input Frequency Output Enable with Tri−State Outputs PCIe Gen1, Gen2, Gen3 Jitter Compliant Typical TIE RMS jitter of 2.5 ps Phase Noise: @ 100 MHz
Offset Noise Power 100 Hz −109.4 dBc 1 kHz −127.8 dBc 10 kHz −136.2 dBc 100 kHz −138.8 dBc 1...
Similar Datasheet