quad power half bridge
STA533WF
18-volt, 3-amp, quad power half-bridge
Features
■ Multipower BCD technology ■ Low input/output pulse width dis...
Description
STA533WF
18-volt, 3-amp, quad power half-bridge
Features
■ Multipower BCD technology ■ Low input/output pulse width distortion ■ 200-mΩ RdsON complementary DMOS output
stage ■ CMOS-compatible logic inputs ■ Thermal protection ■ Thermal warning output ■ Undervoltage protection ■ Short-circuit protection
Description
The STA533WF is a monolithic quad half-bridge stage in multipower BCD technology. The device can be used as a dual bridge or reconfigured, by connecting pin CONFIG to pins VDD, as a single bridge with double-current capability.
The device is designed for the output stage of a stereo Full Flexible Amplifier (FFX™). It is capable of delivering 10 W x 4 channels into 4-Ω
PowerSSO36 package with exposed pad down
loads with 10% THD at VCC = 18 V in single-ended configuration.
It can also deliver 20 W + 20 W into 8-Ω loads with 10% THD at VCC = 18 V in BTL configuration or, in single parallel BTL configuration, 40 W into a 4-Ω load with 10% THD at VCC = 18 V.
The input pins have a threshold proportional to the voltage on pin VL.
The STA533WF comes in a 36-pin PowerSSO package with exposed pad down (EPD).
Table 1. Device summary
Order code
Temperature range
STA533WF STA533WF13TR
0 to 70 °C 0 to 70 °C
Package PowerSSO36 EPD PowerSSO36 EPD
Packaging Tube Tape and reel
June 2011
Doc ID 17658 Rev 2
1/15
www.st.com
15
Pin description
1 Pin description
Figure 1. Pin out
GNDSUB OUT2B OUT2B VCC2B GND2B GND2A VCC2A OUT2A OUT2A OUT1B OUT1B VCC1B GND1B GND1A VCC1A OUT...
Similar Datasheet