MC9S08SC4

Freescale Semiconductor Data Sheet: Technical Data Document Number: MC9S08SC4 Rev. 4, 6/2010 www.DataSheet4U.com MC9S08SC4 8-Bit Microcontroller Data Sheet MC9S08SC4 948F-01 8-Bit HCS08 Central Processor Unit (CPU) Up to 40 MHz HCS08 CPU (central processor unit); up to 20 MHz bus frequency HC08 instruction set with added BGND instruction 4 KB of FLASH with read/program/erase over full operating voltage and temperature 256 bytes of Random-access memory (RAM) Breakpoint capability to allow single breakpoint setting during in-circuit debugging Peripherals SCI — Serial Communication Interface Full-duplex non-return to zero (NRZ) LIN master extended break generation LIN slave extended break detection Wake-up on active edge TPMx — Two 2-channel Timer/PWM modules (TPM1 and TPM2) — 16-bit modulus or up/down counters — Input capture, output compare, buffered edge-aligned or center-aligned PWM ADC — Analog to Digital Converter — 8-channel, 10-bit resolution — 2.5 μs conversion time — Automatic compare function — Temperature sensor — Internal bandgap reference channel 12 general purpose I/O pins (GPIOs) 8 interrupt pins with selectable polarity Hysteresis and configurable pull-up device on all input pins; Configurable slew rate and drive strength on all output pins. 16-TSSOP 4.5-5.5 V operation C,V, M temperature ranges available, covering -40 125 °C operation — — — — On-Chip Memory Power-Saving Modes Two very low power stop modes Reduced power wait mode Osci...