RC2012F100AS

www.DataSheet4U.com STRUTURE AND DIMENSIONS Glass Coating l1 l1 RuO2 Type Resistor H Alumina Substrate l2 Thick-Film Electrode L Special Plating l2 W (UNIT : mm ) Type RC1005(1/16W ) RC1608(1/10W) RC2012( 1/8W ) RC3216( 1/4W) RC3225( 1/4W ) RC5025( 1/2W ) RC6432( 1W ) 1.60 L 1.00 0.05 0.10 2.00 0.20 3.20 0.20 3.20 0.20 5.00 0.15 6.30 0.15 W 0.50 0.05 0.80 0.15 1.25 0.15 1.60 0.15 2.55 0.20 2.50 0.15 3.20 0.15 H 0.35 0.05 0.45 0.10 0.50 0.10 0.55 0.10 0.55 0.10 0.55 0.15 0.55 0.15 I1 0.20 0.10 0.30 0.20 0.40 0.20 0.45 0.20 0.45 0.20 0.60 0.20 0.60 0.20 I2 0.25 0.10 0.35 0.10 0.35 0.20 0.40 0.20 0.40 0.20 0.60 0.20 0.60 0.20 PARTS NUMBERING SYSTEM RC 1 2012 2 J 3 100 4 CS 5 Code Designation Chip Resistor -RC :Glass Coating -RH :Polymer Epoxy Coating Dimension (mm) 1005 : 1.0 1608 : 1.6 2012 : 2.0 3216 : 3.2 3225 : 3.2 5025 : 5.0 6432 : 6.4 0.5 0.8 1.25 1.6 2.55 2.5 3.2 Resistance Tolerance D : 0.5% F : 1% G: 2 % J: 5% K : 10% Resistance Value 1st two digits represents Significant figures. The last digit represents the number of zeros. Jumper chip is represented as 000 Packaging Code AS : Tape Packaging. 13” CS : Tape Packaging. 7” ES : Tape Packaging. 10” BS : Bulk Packaging. Resistance Value Marking 3 or 4 digit coding system. (IEC Coding System) 4 www.DataSheet4U.com GENERAL SPECIFICATION Descripition Power Rating (W) at 70 RC1005 0.063W RC1608 0.10W RC2012 0.125W RC3216 0.25W RC3225 0.25W RC5025 0.5W RC6432 1W 1608, 2012, 3216 100 80 60 100 80...