E13C7

www.DataSheet4U.com E13C7 Series RoHS Compliant (Pb-Free) LVPECL Output Oscillators 3.3V Supply Voltage Ceramic 6-pad SMD Package Stability to ±25ppm Tri-State Output Complementary Output Available on Tape and Reel Wide Range of Available Frequencies H L W E13C7 2.0 7.0 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Nominal Frequency (MHz) 77.760M, 78.125M, 80M, 80.157M, 85M, 87.125M, 90M, 100M, 106.25M, 110M, 119M, 120M, 122.888M, 124.4M, 125M, 127M, 128M, 133M, 133.333M, 137.472M,150M, 155.52M, 156.25M, 159.375M, 161.1328M, 162.5M, 166M, 170M, 175M, 176.83816M, 187.5M, 187.509375M, 200M, or 212.5MHz Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Frequency Tolerance / Stability 0°C to 70°C, or -40°C to +85°C -55°C to 125°C 3.3VDC ±5% 75mA Maximum ±100ppm, ±50ppm, or ±25ppm Maximum Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output VIH of 70% of VCC Minimum Tri-State Input Voltage No Connection VIL of 30% of VCC Maximum Without Load Standby Current Start Up Time RMS Phase Jitter Typical Phase Noise FJ = 12kHz to 20MHz Fo=156.250MHz Inclusive of All Conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25°C, Shock, and Vibration 0°C to 85°C -40°C to 0°C 0°C to 85°C -40°C to 0°C 20% to 80% of waveform at 50% of ...