7-Channel Smart LED Driver
Data Sheet
Charge Pump, 7-Channel Smart LED Driver with I2C Interface
ADP8861
08391-001
FEATURES
Charge pump with aut...
Description
Data Sheet
Charge Pump, 7-Channel Smart LED Driver with I2C Interface
ADP8861
08391-001
FEATURES
Charge pump with automatic gain selection of 1×, 1.5×, and 2× for maximum efficiency
7 independent, programmable LED drivers 7 drivers capable of 30 mA (typical) 1 driver also capable of 60 mA (typical)
Programmable maximum current limit (128 levels) Standby mode for <1 μA current consumption 16 programmable fade in and fade out times
0.1 sec to 5.5 sec Choose from linear, square, or cubic rates Fading override I2C-compatible interface for all programming Dedicated reset pin and built-in power-on reset (POR) Short-circuit, overvoltage, and overtemperature protection Internal soft start to limit inrush currents Input-to-output isolation during faults or shutdown Operation down to VIN = 2.5 V with undervoltage lockout (UVLO) at VIN = 2.0 V Available in a small 20-ball, 2.15 mm × 2.36 mm × 0.6 mm WLCSP or a 20-lead, 4 mm × 4 mm × 0.75 mm LFCSP
APPLICATIONS
Mobile display backlighting Mobile phone keypad backlighting Dual RGB backlighting LED indication General backlighting of small format displays
GENERAL DESCRIPTION
The ADP8861 provides a powerful charge pump driver with independent control of up to seven LEDs. These seven LEDs can be independently driven up to 30 mA (typical). The seventh LED can also be driven to 60 mA (typical). All LEDs are programmable for maximum current and fade in/out times via the I2C interface. These LEDs can also be combined into groups to reduce the p...
Similar Datasheet