MIC3201

MIC3201 High Brightness LED Driver with High-Side Current Sense General Description Features The MIC3201 is a hysteretic step-down, constant-current, High-Brightness LED (HB LED) driver capable of driving up to four, 1A LEDs. It provides an ideal solution for interior/exterior lighting, architectural and ambient lighting, LED bulbs, and other general illumination applications. The MIC3201 operates with an input voltage range from 6V to 20V. The hysteretic control gives good supply rejection and fast response during load transients and PWM dimming. The high-side current sensing and on-chip current sense amplifier delivers LED current with ±5% accuracy. An external high-side current sense resistor is used to set the output current. 6.0V to 20V input voltage range High efficiency (>90%) ± 5% LED current accuracy High-side current sense Dedicated dimming control input Hysteretic control (no compensation!) 1A internal power switch Up to 1MHz switching frequency Adjustable constant LED current 5V on board regulator The MIC3201 offers a dedicated PWM input (DIM) which enables a wide range of pulsed dimming. A high switching frequency operation up to 1MHz allows the use of smaller external components minimizing space and cost. Over temperature protection –40°C to +125°C junction temperature range Available in an 8-Pin ePAD SOIC package The MIC3201 operates over a junction temperature range of -40°C to +125°C and is available in an 8-pin ePAD SOIC pack...