DAC1003D160

DAC1003D160 Dual 10 bits DAC, up to 160 MHz, 2 x interpolation Rev. 02 — 13 August 2008 www.DataSheet4U.com Product data sheet 1. General description The DAC1003D160 is optimized to reduce architecture complexity and overall system cost. The Digital-to-Analog Converter (DAC) leads dynamic performance in multi-carrier support because of its direct IF conversion capabilities. With an internal sampling rate up to 160 MHz, the DAC1003D160 is an extremely competitive solution for broadband wireless systems transmitters, as well as a wide range of applications. 2. Features I I I I I I I I I I Dual 10-bit resolution Spurious Free Dynamic Range (SFDR) = 80 dBc at 2.5 MHz Input data rate up to 80 MHz 2 × interpolation filter Output data rate up to 160 Mhz Single 3.3 V power supply Low noise capacitor free integrated Phase-Locked Loop (PLL) Low power dissipation HTQFP80 package Ambient temperature from −40 °C to +85 °C 3. Applications I I I I I I Broadband wireless systems Digital radio links Cellular base stations Instrumentation Cable modems Cable Modem Termination System (CMTS)/Data Over Cable Service Interface Specification (DOCSIS) NXP Semiconductors DAC1003D160 Dual 10 bits DAC, up to 160 MHz, 2 x interpolation www.DataSheet4U.com 4. Ordering information Table 1. Ordering information Package Name DAC1003D160HW HTQFP80 Description plastic thermal enhanced thin quad flat package; 80 leads; body 12 × 12 × 1 mm; exposed die pad Version SOT841-1 Type number 5. Block diagram DA...