DC-3000 MHz GENERAL PURPOSE AMPLIFIER
www.DataSheet4U.com
• • • • • • •
Characterized for 100-3000MHz Operation +26 dBm Output IP3 +17 dB Gain at 850 MHz +1...
Description
www.DataSheet4U.com
Characterized for 100-3000MHz Operation +26 dBm Output IP3 +17 dB Gain at 850 MHz +12 dB Gain at 2000 MHz Internally 50 matched input and output +3V Single Voltage Supply Low Current Consumption: 30mA
The ICG series of Gain Blocks are general purpose gain stages consisting of Broadband MMIC amplifiers in a Darlington configuration. The amplifiers housed in a lowcost surface mountable package provide a high output intercept point, high gain and low noise figure and do not require an external bias resistor. The ICG2130 can be used for amplification in IF and RF applications from 100 MHz to 3000 MHz. The amplifier provides a gain of 17dB typically at 850 MHz and has single ended input and output, internally matched to 50 Ohms. The device can be operated with a single +3V supply. The IC is available in industry standard 6L-SOT23 package.
IF or RF Buffer Amplifier Driver/Pre-Driver for CATV/SAT TV Amplifier VCO Buffer Driving Up/Down Converter General Rx/Tx Amplification LNB IF Path ISM Band Transceivers - WLAN - IEEE 802.11, Bluetooth ISO/EPC Compliant UHF RFID Readers
Gnd
1
Bias
6
Gnd
RFin
2
5
Vcc / RFout
Gnd
3
4
ICG2130
Gnd
! "
Gnd
1
6
Gnd
6L-SOT23
C MI 0 IC 213 G IC
Rfin
2
ICG2130
5
Vcc / RFout
Gnd
3
4
Gnd
Performance tests for ICmic products were performed internally by ICmic and measured using specific systems and/or components. Any difference in circuit implementation, test software, or test...
Similar Datasheet