300Mbps ATE Drivers/Comparators
MAX9972
Quad, Ultra-Low-Power, 300Mbps ATE Drivers/Comparators
General Description
The MAX9972 four-channel, ultra-low...
Description
MAX9972
Quad, Ultra-Low-Power, 300Mbps ATE Drivers/Comparators
General Description
The MAX9972 four-channel, ultra-low-power, pin-electronics IC includes, for each channel, a three-level pin driver, a window comparator, a passive load, and force-and-sense Kelvin-switched parametric measurement unit (PMU) connections. The driver features a -2.2V to +5.2V voltage range, includes high-impedance and active-termination (3rd-level drive) modes, and is highly linear even at low voltage swings. The window comparator features 500MHz equivalent input bandwidth and programmable output voltage levels. The passive load provides pullup and pulldown voltages to the device-under-test (DUT).
Low-leakage, high-impedance, and terminate controls are operational configurations that are programmed through a 3-wire, low-voltage, CMOS-compatible serial interface. High-speed PMU switching is realized through dedicated digital control inputs.
This device is available in an 80-pin, 12mm x 12mm body, 0.50mm pit...
Similar Datasheet