Document
Product Specification
S5540340
GaAs Push Pull, 40 – 550MHz, 34.0dB min. Gain @ 550MHz, 280mA max. @ 24VDC
FEATURES
• • • •
• •
Excellent linearity Superior return loss performance Extremely low distortion Optimal reliability Extremely low noise Unconditionally stable under all terminations
S5540340
APPLICATION • 40 to 550 MHz CATV amplifier systems
www.DataSheet4U.com
DESCRIPTION • Hybrid Push Pull amplifier module
employing GaAs die
GaAs Push Pull Hybrid 40 – 550MHz 34.0dB min. Gain @ 550MHz 280mA max. @ 24VDC
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134)
SYMBO L
Vi Vov Tstg Tmb
PARAMETER
RF input voltage (single tone) DC supply over-voltage (5 minutes) storage temperature operating mounting base temperature
MIN.
- 40 - 30
MAX.
75 30 + 100 + 100
UNIT
dBmV V °C °C
CHARACTERISTICS
Table 1: S-Parameter, Noise Figure, DC Current; VB = 24V; Tmb = 30°C; ZS = ZL = 75 Ω
SYMBOL
Gp SL FL S11 S22 F Itot
PARAMETER
power gain slope 1) flatness of frequency response input return loss output return loss noise figure total current consumption (DC)
CONDITIONS
f = 50 MHz f = 550 MHz f = 40 to 550 MHz f = 40 to 550 MHz
(Peak to Valley)
MIN.
34.0 0.5 20.0 16.0 20.0 16.0 -
TYP.
34.0 1.5
MAX.
36.0 2.0 1.0 4.5 280.0
UNIT
dB dB dB dB dB dB dB dB dB mA
f = 40 to 160 MHz f = 160 to 550 MHz f = 40 to 160 MHz f = 160 to 550 MHz f = 50 to 550 MHz
240.0
Notes: 1) The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
Page 1 of 4
2005 Sep 21
Document Revision Level B
Product Specification
S5540340
GaAs Push Pull, 40 – 550MHz, 34.0dB min. Gain @ 550MHz, 280mA max. @ 24VDC
CHARACTERISTICS
Table 2: Distortion data 40 – 550 MHz; VB = 24V; Tmb = 30°C; ZS = ZL = 75 Ω
SYMBOL
CTB XMOD CSO
CONDITIONS
79 ch. flat; Vo = 44 dBmV 79 ch. flat; Vo = 44 dBmV 79 ch. flat; Vo = 44 dBmV
1) 1) 1)
MIN.
-
TYP.
-66 -62 -65
MAX.
- 64 - 60 - 63
UNIT
dBc dBc dBc
Notes: 1) 79 channels, NTSC frequency raster: 55.25 MHz to 547.25 MHz, +44 dBmV flat output level. Composite Second Order (CSO) The CSO parameter (both sum and difference products) is defined by the NCTA. www.DataSheet4U.com Composite Triple Beat (CTB) The CTB parameter is defined by the NCTA. Cross Modulation (XMOD) Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested.
Page 2 of 4
2005 Sep 21
Document Revision Level B
Product Specification
S5540340
GaAs Push Pull, 40 – 550MHz, 34.0dB min. Gain @ 550MHz, 280mA max. @ 24VDC
I U
123 5 7 89
E J
www.DataSheet4U.com
C M O Q N B R
S T
P
K
øG
D H L F A
All Dimensions in mm:
nominal A B C D E F G 44,6 ± 0,2 13,6 ± 0,2 20,4 ± 0,5 8 ± 0,15 12,6 ± 0,15 38,1 ± 0,2 4 +0,2 / -0,05 4 ± 0,2 25,4 ± 0,2 UNC 6-32 4,2 ± 0,2 27,2 ± 0,2 11,6 ± 0,5 5,8 ± 0,4 0,25 ± 0,02 0,45 ± 0,03 2,54 ± 0,3 2,54 ± 0,5 2,54 ± 0,25 5,08 ± 0,25 5,08 ± 0,25 min 44,4 13,4 19,9 7,85 12,45 37,9 3,95 3,8 25,2 4,0 27,0 11,1 5,4 0,23 0,42 2,24 2,04 2,29 4,83 4,83 max 44,8 13,8 20,9 8,15 12,75 38,3 4,2 4,2 25,6 4,4 27,4 12,1 6,2 0,27 0,48 2,84 3,04 2,79 5,33 5,33
Pinning:
0 5 10mm scale
INPUT GND GND GND GND +VB
1
2
3 4 5 6 7
8
9
OUTPUT
H I J K L M N O
Notes:
European Projection
P Q R S T U
Page 3 of 4
2005 Sep 21
Document Revision Level B
Product Specification
S5540340
GaAs Push Pull, 40 – 550MHz, 34.0dB min. Gain @ 550MHz, 280mA max. @ 24VDC
DEFINITIONS Data Sheet Status Objective Product Specification Preliminary Product Specification Product Specification Limiting values
www.DataSheet4U.com
This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications.
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification.
Premier Devices reserves the right to make changes without further notice to any products herein. Premier Devices makes no warranty representation or guarantee regarding the suitability of its products for any particular purpose, nor does Premier Devices assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Premier Devices datasheets and/or specifications can and do vary in different applications and actu.